Correlation Characteristics Comparison of SF6 Decomposition versus Gas Pressure under Negative DC Partial Discharge Initiated by Two Typical Defects
نویسندگان
چکیده
Aimed to clarify the correlation characteristics between the internal partial discharge (PD) in negative direct current (DC) gas insulated system (GIS) and gas pressure initiated by two typical defects (i.e., free-metal particles and metal protrusion), this study on PD decomposition of sulfur hexafluoride (SF6) was investigated under different pressures on the basis of constructing a SF6 decomposition experimental platform with DC PD. Free-metal particles and metal protrusion in a GIS were simulated using a spherical-bowl electrode and a needle-plate electrode, respectively. Trends and differences in the performance of SF6 decomposition components SOF2, SO2F2, CO2, and SO2 at different pressures were compared and analyzed by experiments under different defects. Based on gas microscopic ionization theory, the relationship between the decomposition component and gas pressure was deduced and verified. The concentrations of different decomposition components were found to vary with the change in gas pressure under different defects, whereas the characteristic ratios of decomposition components versus gas pressure showed a similar trend.
منابع مشابه
Decomposition Characteristics of SF6 and Partial Discharge Recognition under Negative DC Conditions
Four typical types of artificial defects are designed in conducting the decomposition experiments of SF6 gas to obtain and understand the decomposition characteristics of SF6 gas-insulated medium under different types of negative DC partial discharge (DC-PD), and use the obtained decomposition characteristics of SF6 in diagnosing the type and severity of insulation fault in DC SF6 gas-insulated...
متن کاملStudy on the Characteristic Decomposition Components of DC SF6-Insulated Equipment under Positive DC Partial Discharge
Pulses with different amplitudes occur when an inner partial discharge fault exists in SF6-gas-insulated DC high-voltage electrical equipment. SF6 decomposes following complex physical and chemical processes. Discussing and quantifying the mathematical relationship of pulse discharge quantities to SF6 decomposition component characteristics is helpful to evaluate and predict the insulation faul...
متن کاملUsing SF6 Decomposed Component Analysis for the Diagnosis of Partial Discharge Severity Initiated by Free Metal Particle Defect
The decomposition characteristics of a SF6 gas-insulated medium were used to diagnose the partial discharge (PD) severity in DC gas-insulated equipment (DC-GIE). First, the PD characteristics of the whole process were studied from the initial PD to the breakdown initiated by a free metal particle defect. The average discharge magnitude in a second was used to characterize the PD severity and th...
متن کاملAnalysis of the Sensitivity of K-Type Molecular Sieve-Deposited MWNTs for the Detection of SF6 Decomposition Gases under Partial Discharge
Sulfur hexafluoride (SF6) is widely utilized in gas-insulated switchgear (GIS). However, part of SF6 decomposes into different components under partial discharge (PD) conditions. Previous research has shown that the gas responses of intrinsic and 4 Å-type molecular sieve-deposited multi-wall carbon nanotubes (MWNTs) to SOF2 and SO2F2, two important decomposition components of SF6, are not obvio...
متن کاملThe SF6 Decomposition Mechanism: Background and Significance
Gas Insulated Switchgear (GIS) has been widely used in substations. The insulating medium used in GIS is sulfur hexafluoride (SF6) gas. However, the internal insulation defect existed in GIS would inevitably lead to partial discharge (PD), and cause the composition of SF6 to SOF2, SO2F2 and SO2 and other characteristic component gases. The decomposition phenomenon would greatly reduce the insul...
متن کامل