A Fabrication Study on DCF Compensated SMF using Optsim Simulation Software
نویسندگان
چکیده
This Paper deals with the analysis of the performance limitation of SMF (single mode fiber) due to nonlinear effect. With the help of optsim simulation software a combination of SMF and DCF (dispersion compensation fiber) has been simulated with a proper variation in length to tackle the effects in the transmission system. Better performance was shown when a combination of SMF length 90Km and DCF length 10km was chosen. The Q-value and BER technique has been used for show the system performance.
منابع مشابه
Optimization of DCF Length with Minimum BER using SMF
In this report the analysis of optimum DCF Length for minimum bit error rate (BER) in SMF is done. With the aid of optsim simulation tool a DCF is employed with the proper variation in length to overcome the non linearity to get the minimum BER. Better performance was shown when the combination of SMF Length 90Km and DCF Length 12Km was chosen. At this particular value the minimum BER was obtai...
متن کاملDispersion Compensated Fibers with Advanced Modulation Schemes in Optical Fiber Communication System
A comprehensive study of the various modulation techniques has been discussed which helps to increase data rate, to overcome dispersion effects and various non-linear effects in the fibre. Modulation formats such as OOK (On Off Keying), BPSK (Binary Phase Shift Keying), DPSK (Differential Phase Shift Keying), DP-QPSK (Dual Polarized Quadrature Phase Shift Keying) and duobinary are studied. The ...
متن کاملSymmetrical Dispersion Compensation For High Speed Optical Links
In this paper, the performance of high speed optical fiber based network is analysed by using dispersion compensating module (DCM). The optimal operating condition of the DCM is obtained by considering dispersion management configurations for the symmetrical system i.e Pre-compensation & Post-compensation. The dispersion compensating fiber (DCF) is tested for a single span, single channel syste...
متن کاملDesign of Symmetric dispersion compensated, long haul, Single and Multichannel Optical Lightwave Systems in Telecommunications: Theory, Background and Simulation Model-A Study
Here we propose a model on EnhancedLarge Effective Area Fiber (E-LEAF) and Dispersion Compensation Module (DCM) with precise designed Dispersion Compensation Fiber (DCF). The Model is implemented in a long haul Single and Multichannel Optical telecommunication systems with E-LEAF as data transmission Fiber (NZ-DSF) of 1700Km (85 Km SMF×20 loops) length. The DCM is proposed in Symmetric Compensa...
متن کاملSimulation of Pre & Post Compensation Techniques for 16 Channels DWDM Optical Network using CSRZ & DRZ Formats
Volume 3, Issue 4, April 2014 Page 346 Abstract Dense Wavelength Division Multiplexing (DWDM) is a promising technique which can meet the increasing demand for communication bandwidth. It multiplexed all the channel signals onto single fiber thus increases the capacity of existing fiber. It is a perfect substitute for long haul networks. The major problem that DWDM technique suffered is dispers...
متن کامل