The Superconducting Medium Beta Prototype for Radioactive Beam Acceleration at Triumf
نویسنده
چکیده
A 106.08MHz superconducting quarter wave resonator, based on the bulk niobium technology developed at LNL for low beta heavy ion linacs, has been designed, constructed and tested in a collaboration between INFNLNL and TRIUMF. This superconducting heavy ion linac of ISAC-II, the future extension to the present ISAC radioactive beam facility. sections. Cavity design characteristics and test results will be reported.
منابع مشابه
Performances of the ISAC Heavy Ion Linacs
ISAC is the TRIUMF facility for the production and post acceleration of Rare Isotope Beams (RIBs). The post acceleration section includes two normal conducting linacs, an RFQ injector and a variable energy IH-DTL, and a superconducting linac composed of five cryomodules each containing four quarter wave bulk niobium resonators. All three machines operate CW. The RFQ and DTL deliver beam since 2...
متن کاملSolid State Amplifiers for Linear Accelerators at Triumf
Solid state amplifiers are being used for linear accelerators at TRIUMF which are either being upgraded or under development. The Radioactive Ion Beam (RIB) facility at ISAC II which is being upgraded with additional 20 quarter wave superconducting bulk niobium cavities will employ twenty 141 MHz solid state amplifiers. A 650 MHz solid state amplifier for electron gun development and an 1.3 GHz...
متن کاملProgress in the Conceptual Design of the Isac-ii Linac at Triumf
TRIUMF is funded through to 2005 to proceed with an extension to the ISAC facility, ISAC-II, to permit acceleration of radioactive ion beams up to energies of at least 6.5 MeV/u for masses up to 150. The upgrade includes the addition of a post-stripper superconducting linac to accelerate beams of 3 ≤ A/q ≤ 7 to an energy of at least 6.5 MeV/u. The possibility of using the superconducting linac ...
متن کاملDecelerating Heavy Ion Beams Using the Isac Dtl
At the ISAC facility in TRIUMF radioactive ion beams (RIB) are produced using the ISOL method and post accelerated. The post accelerator chain consists of a radio frequency quadrupole (RFQ) injector followed by a drift tube linac (DTL) that accelerates the ions from 150 keV/u up to 1.8 MeV/u. A further stage of acceleration is achieved using a superconducting linac where the beam is injected us...
متن کاملAcceleration of Charge Bred Radioactive Ions at Triumf
Most ion sources at ISOL (isotope separation on-line) facilities can produce only singly charged ions but efficient post acceleration requires high charge states. For light ions this can be achieved by stripping after a first moderate acceleration but with heavy ions this is no longer possible and charge state breeding is necessary. The breeder should be able to work at a high efficiency for th...
متن کامل