Analysis of a Rectangular Monopole Patch Antenna

نویسندگان

  • Priyadarshi Suraj
  • Vibha Rani Gupta
چکیده

A small printed monopole antenna for ultra wide band applications is proposed. The shape of the radiating patch considered is rectangular. The effect of the current distribution has been studied. The patch configuration is then modified to improve the impedance bandwidth. The dimensions of the patch and the distance between ground plane and radiating patch are optimized using the Genetic Algorithm. The 2:1 VSWR bandwidth of the proposed antenna covers the entire UWB application range specified by FCC that is from 3.1 GHz to 10.6 GHz.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications

This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...

متن کامل

Ultra Wideband Monopole Antenna Excited by a Capacitive Coupling Feed with Double Band Notch Function

This paper presents the results of a new monopole antenna that exhibits 2.75-10.7 GHz performance. The proposed antenna consists of a radiating patch with notches excited by capacitive coupling feed. Also, the antenna’s truncated ground-plane incorporates a central notch. This modification significantly improves the antenna’s impedance bandwidth by 118% over an ultra-wideband frequency range. T...

متن کامل

Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications

A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...

متن کامل

Dual Band Slotted Patch Antenna for On/Off-body Communication

Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...

متن کامل

Design and Implement Printed Rectangular Monopole Broadband Antenna for Wireless Networks

This paper tells how to construct rectangular monopole antenna which will be printed on printed circuit board (PCB). The antenna behaves as planar monopole antenna as it has rectangular patch and ground plane which lies in same plane of PCB. Also this antenna is a broadband antenna because its ratio bandwidth lies under broadband category. In comparison with monopole antenna broadband planer mo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009