TWO STAGE MONOLITHIC THIN FILMaCOOLERS
نویسندگان
چکیده
Optoelectronic devices such as vertical cavity surface emitting lasers (VCSEL’s) generate large heat power densities on the order of 100’s of Wlcd . A novel device structure consisting of a two-stage monolithically integrated thin film thermionic and thermoelectric cooler is proposed to accommodate these cooling requirements. By optimizing the geometry of each stage, improved heat spreading can be achieved resulting in an increase of the cooling power density. The two-stage, three terminal structure is investigated experimentally. Cooling power densities of 100’s Wlcm’ have been demonstrated in 111-V semiconductor material systems proving that the integration of these coolers with optoelectronic devices should be possible.
منابع مشابه
تولید و بررسی ریزساختار نانو کامپوزیت ریختگی AZ91/ZrO2
Application of ceramic reinforcements is one of the effective and well-known ways to refine the microstructure of brittle metals such as magnesium. In this research, the influence of nano/micro particles of zirconia on the microstructure of cast AZ91 alloy was studied. At the first stage, nano and micro ZrO2 powders were blended through mechanical alloying procedure. In five specimens, the tota...
متن کاملMagnetostrictive Delay Line Thin Films as Sensing Elements
A miniaturized arrangement based on magnetostrictive delay line (MDL) mechanism, able to be used as sensor, is realized using thin films technology. In order to obtain high-performance miniaturized magnetostrictive delay line arrangement we used Fe, Ni and Fe70B20Si6C4 amorphous thin films as magnetostrictive sensing element because of their better magnetic and magnetoelastic characteristics th...
متن کاملFabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملComparison of the effect of chlorhexidine and listerine on the stability of the monolithic glazed zirconium dye and the IPS-e.max glazed ceramics( in vitro)
Abstract Background and aim: Regarding the prevalence of monolithic zirconia and glazed ceramics IPS-e.max, and inadequate research on the color change of chlorhexidine and listerine mouthwashes on these two types, this study was aimed to compare the effect of these two mouthwashes on the stability of the The mentioned materials. Materials and Methods: This experimental study was carried o...
متن کاملDetecting Milling Deformation in 7075 Aluminum Alloy Aeronautical Monolithic Components Using the Quasi-Symmetric Machining Method
The deformation of aeronautical monolithic components due to CNC machining is a bottle-neck issue in the aviation industry. The residual stress releases and redistributes in the process of material removal, and the distortion of the monolithic component is generated. The traditional one-side machining method will produce oversize deformation. Based on the three-stage CNC machining method, the q...
متن کامل