Design of a Low Power Combinational Circuit by using Adiabatic Logic
نویسنده
چکیده
A novel low power and Positive Feedback Adiabatic Logic (PFAL) combinational low power circuit is presented in this paper. The power consumption and general characteristics of the PFAL combinationallow power circuit arethen compared against two combinational low power circuit Efficient Charge Recovery Logic (ECRL), Conventional CMOS. The proposed PFAL combinational low power circuit design was proven to be superior to the other two designs in power dissipation and area. The combination of low power and low transistor count makes the new PFAL cell a viable option for low power design.
منابع مشابه
Low Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit ...
متن کاملLow-Power, Low-Noise Adder Design with Pass-transistor Adiabatic Logic
AbstraceIn this paper, the efficiency of a fully adiabatic logic circuit is compared with its combinational and pipelined static CMOS counterparts. The performance of each circuit is studied in terms of the maximum frequency of operation, the minimum voltage of operation, the circuit energy consumption, and the switching noise generated by the circuit. An 8-bit carry look-ahead adder is designe...
متن کاملAdiabatic CMOS Circuit Design: Principles and Examples
with the Department of Information and Electronic Engineering, Zhejiang University, Hangzhou 310027, People’s Republic of China. M Pedram is with the Department of Electrical Engineering-Systems, University of Southern California, Los Angeles CA 90089, USA. Adiabatic CMOS Circuit Design: Principles and Examples X. Wu, G. Hang, and M. Pedram Abstract: In view of changing the type of energy conve...
متن کاملEfficiency of Adiabatic Logic for Low-Power, Low-Noise VLSI
ln this paper, the efficiency of a fully adiabatic logic circuit is compared with its combinational and pipelined static CMOS counterparts. The performance of each circuit is studied in terms of the maximum frequency of operation, the minimum voltage of operation, the circuit energy consumption, and the switching noise generated by the circuit. An 8-bit carry look-ahead adder is designed using ...
متن کاملDesign of power-efficient adiabatic charging circuit in 0.18μm CMOS technology
In energy supply applications for low-power sensors, there are cases where energy should be transmitted from a low-power battery to an output stage load capacitor. This paper presents an adiabatic charging circuit with a parallel switches approach that connects to a low-power battery and charges the load capacitor using a buck converter which operates in continuous conduction mode (CCM). A gate...
متن کامل