Real-time acquisition and tracking for GPS receivers
نویسندگان
چکیده
Current GPS receivers spend much time in base-band processing performing acquisition and tracking. This is due to the large number of required operations in the software-based signal processing. This paper presents a novel signal acquisition and tracking method that reduces the number of operations, simplifies hardware implementation and decreases the acquisition time. The implementation of this method in an FPGA provides very fast processing of incoming GPS samples that satisfies real-time requirements.
منابع مشابه
Real-Time Interference Detection in Tracking Loop of GPS Receiver
Global Positioning System (GPS) spoofing could pose a major threat for GPS navigation ‎systems, so the GPS users have to gain a better understanding of the broader implications of ‎GPS.‎ In this paper, a plenary anti-spoofing approach based on correlation is proposed to distinguish spoofing effects. The suggested ‎method can be easily implemented in tracking loop of GPS receiver...
متن کاملImprovement in Differential GPS Accuracy using Kalman Filter
Global Positioning System (GPS) is proven to be an accurate positioning sensor. However, there are several sources of errors such as ionosphere and troposphere effects, satellite time errors, errors of orbit data, receivers errors, and errors resulting from multi-path effect which reduce the accuracy of low-cost GPS receivers. These sources of errors also limit the use of single-frequency GPS r...
متن کاملCovariance Analysis of a vector tracking GPS receiver based on MMSE multiuser Detection
In high dynamic conditions, using vector tracking loops instead of scalar tracking loops in GPS receivers is proved as an efficient method to compensate the performance. The Minimum Mean Squared Error detector as a multiuser detector is applied in the vector tracking loop for more reliability and efficiency. The Kalman filter does the two tasks of tracking and extracting the navigation data aft...
متن کاملSmoother-Based GPS Signal Tracking in a Software Receiver
Global Positioning System (GPS) signal tracking algorithms have been developed using the concepts of Kalman filtering and smoothing. The goal is to improve phase estimation accuracy for non-real-time applications. A bit-grabber/software-receiver has been developed for the GPS L1 coarse/acquisition signal. The bit grabber down-converts, digitizes, and stores the raw RF signal. The software recei...
متن کاملRF Front-End IC Simplifies Software GPS Receiver - Application Note - Maxim
This article investigates the basic theory of software-based receivers for L1-band civilian GPS applications, including a discussion of signal acquisition and tracking, and the need for bit synchronization in the receiver. Also included is a brief description of an L1-band GPS receiver, the MAX2741, which serves as a compact and inexpensive RF front-end for the receiver. A similar article appea...
متن کامل