Onset Time Determination of Acoustic and Electromagnetic Emission during Rock Frac- Ture
نویسندگان
چکیده
We present an application of the Akaike Information Criterion (AIC ) for an automatic and accurate determination of the acoustic and electromagnetic emission (AE and EME) onset times. The onset time information is used to derive the time delays between correlated AE and EME events from rock specimens during laboratory fracture experiments. The observed correlation in time between AE and EME events is consistent with EME release during microcrack growth. Relevant load drops are accompanied by AE bursts, expected to be generated during macrocracks propagation.
منابع مشابه
Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملDetermination of P – wave arrival time of acoustic events
The new approach to the P-wave arrival time determination based on acoustic emission data from loading experiments is tested. The algorithm used in this paper is built on the STA/LTA function computed by a convolution that speeds up the computation process very much. The picking process makes use of shifting of temporary onset until certain conditions are fulfill and as a main decision criterio...
متن کاملDamage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method
In this study, the longitudinal and hoop tensile strengths of an industrial ±55° Glass Reinforced Epoxy (GRE) pipe with eighteen layers as well as the associated failure mechanisms are determined. To obtain the longitudinal and hoop tensile strengths values, three specimens are cut from the studied GRE pipe in each direction. A comparison is done between both the strength values, and the fractu...
متن کاملOn the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization
A series of tests have been conducted to investigate fatigue damage characterization in corroded welded steel plates using structural health monitoring (SHM) techniques. Acoustic Emission (AE) is a non-destructive testing (NDT) technique with potential applications for locating and monitoring fatigue cracks in service. In the present work, AE is implemented to characterize damage during crack e...
متن کاملCluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)
Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...
متن کامل