Surprising importance of photo-assisted etching of silicon in chlorine-containing plasmas
نویسندگان
چکیده
The authors report a new, important phenomenon: photo-assisted etching of p-type Si in chlorinecontaining plasmas. This mechanism was discovered in mostly Ar plasmas with a few percent added Cl2, but was found to be even more important in pure Cl2 plasmas. Nearly monoenergetic ion energy distributions (IEDs) were obtained by applying a synchronous dc bias on a “boundary electrode” during the afterglow of a pulsed, inductively coupled, Faraday-shielded plasma. Such precisely controlled IEDs allowed the study of silicon etching as a function of ion energy, at nearthreshold energies. Etching rates increased with the square root of the ion energy above the observed threshold of 16 eV, in agreement with published data. Surprisingly, a substantial etching rate was observed, independent of ion energy, when the ion energy was below the ion-assisted etching threshold. Experiments ruled out chemical etching by Cl atoms, etching assisted by Ar metastables, and etching mediated by holes and/or low energy electrons generated by Auger neutralization of low-energy ions, leaving photo-assisted etching as the only likely explanation. Experiments were carried out with light and ions from the plasma either reaching the surface or being blocked, showing conclusively that the “sub-threshold” etching was due to photons, predominately at wavelengths< 1700 Å. The photo-assisted etching rate was equal to the ionassisted etching rate at 36 eV, causing substantial complications for processes that require low ion energies to achieve high selectivity and low damage, such as atomic layer etching. Under these conditions, photo-assisted etching likely plays an important role in profile evolution of features etched in Si with chlorine-containing plasmas, contributing to the commonly observed sloped sidewalls and microtrenches. VC 2012 American Vacuum Society. [DOI: 10.1116/1.3681285]
منابع مشابه
Photo-assisted etching of silicon in chlorine- and bromine-containing plasmas
Cl2, Br2, HBr, Br2/Cl2, and HBr/Cl2 feed gases diluted in Ar (50%–50% by volume) were used to study etching of p-type Si(100) in a rf inductively coupled, Faraday-shielded plasma, with a focus on the photo-assisted etching component. Etching rates were measured as a function of ion energy. Etching at ion energies below the threshold for ion-assisted etching was observed in all cases, with Br2/A...
متن کاملFabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching
In this paper metal-assisted chemical etching has been applied to pattern porous silicon regions and silicon nanohole arrays in submicron period simply by using positive photoresist as a mask layer. In order to define silicon nanostructures, Metal-assisted chemical etching (MaCE) was carried out with silver catalyst. Provided solution (or materiel) in combination with laser interference lithogr...
متن کاملNanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer.
The metal-assisted chemical etching (MACE) was used to synthesis silicon nanowires. The effect of etchant concentration, etching and chemical plating time and doping density on silicon nanowires length were investigated. It is held that the increasing of HF and H2O2 concentrations lead to etching rate increment and formation of wire-like structure. The results show that, the appropriate ratio o...
متن کاملInvestigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications
Porous silicon was successfully prepared using metal-assisted chemical etching method. The Effect of HF/H2O2 concentration in etching solution as an affecting parameter on the prepared porosity type and size was investigated. Field emission electron microscopy (FE-SEM) confirmed that all etched samples had porous structure and the sample which was immersed into HF/H2O2 withmolar ratio of 7/3.53...
متن کاملSurface chemistry during plasma etching of silicon
Angle-resolved x-ray photoelectron spectroscopy ( X P S ) and laserinduced thermal desorption (LD), combined with laser-induced fluorescence (LIF) detection, were used to study the etching of olycrystalline Si (poly-Si) and single crystal Si(lO0) in high density (1-2 x 10fl ions/cm3), low presswe (0.510 mTorr) C12MBr-containing, helical resonator plasmas. The XPS measurements on both unmasked S...
متن کامل