Voltage-mode Sito Multifunction Filter Using Only Two Ftfns
نویسندگان
چکیده
In this paper we present a new voltage-mode (VM) multifunction filter configuration using only two four terminal floating nullors (FTFNs) and five passive elements. The circuit with a single input and three outputs can simultaneously realise lowpass (LP), bandpass (BP) and highpass (HP) filter responses. The natural frequency ( 0 ω ) and the bandwidth ( /Q ω0 ) can be orthogonally controlled. The passband gains of two filtering responses can be tuned independently. The active and passive sensitivities are low. Simulated results are included to verify the theoretical analysis.
منابع مشابه
High output impedance current-mode multifunction filter using FTFNs
A new current-mode (CM) single input three outputs (SITO) multifunction filter topology is presented, which employs only three FTFNs or OFAs and five passive elements. From this topology, two filter circuits can be derived selecting the passive elements properly. The proposed filter realizes three filter functions simultaneously all at high impedance outputs. No component matching is required a...
متن کاملCurrent-Mode High Output Impedance Multifunction Filters Employing Minimum Number of FTFNs
In this study, five current-mode FTFN-based multifunction filters are proposed, which realize the same transfer functions in ideal case. All circuits employ two capacitors and three resistors. For each circuit R-C:C-R transformation increases the number of realization possibilities to ten. The proposed topologies simultaneously realize three basic filtering functions using minimum number of FTF...
متن کاملHigh-Input Impedance Voltage-Mode Multifunction Filter Using a Single DDCCTA and Grounded Passive Elements
In this paper, a novel single-input three-output (SITO) second-order multifunction active voltage filter with high-input impedance is proposed. The proposed circuit is based on using the recently reported active building block, namely differential difference current conveyor transconductance amplifier (DDCCTA). It employs one DDCCTA as active element together with one grounded resistor and two ...
متن کاملTriple-Input Single-Output Voltage-Mode Multifunction Filter Using Only two Current Conveyors
A new voltage-mode triple-input single-output multifunction filter using only two current conveyors is presented. The proposed filter which possesses three inputs and single-output can generate all biquadratic filtering functions at the output terminal by selecting different input signal combinations. The validity of the proposed filter is verified through PSPICE simulations. Keywords—Active Fi...
متن کاملCascadable Voltage-Mode Multifunction Biquad Employing Single OTRA
Abstract – A voltage-mode (VM), multi-input single-output (MISO) type multifunction biquad is proposed. It uses only one operational transresistance amplifier (OTRA) as the active element, while previously reported VM multifunction filters require more OTRAs. Proposed MISO type biquad configuration can realize all five different filter transfer functions. Theoretical results are verified with P...
متن کامل