Welding Recovery Methods of the Pressure Casting Dies

ثبت نشده
چکیده

Welding hot-work tool steels, containing 0.3-0.6% of carbon, is difficult both because of the elevated carbon content and because of significant hardening resulted from large amounts of alloying elements. A development of welding technology, i.e. better quality of electrodes, modern welding devices, improved welding technologies and better steel quality, make welding of such steel types possible today. A development of welding technology for tool steels, especially in the case of expensive tools, such as pressure casting dies has a profound justification taking into account economical advantages and quick repair possibilities, which is a matter of principal importance in the case of a lot production of pressure castings.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Laser Grooving of Surface Cracks on Hot Work Tool Steel

Repair welding (RW) with wire cladding is a common procedure to extend the in-service life of heavily loaded tool parts for die and mould industries 1-5 . The main advantages of repair welding are short downtime and cost efficiency compared to production of new tool part. Repair welding in general lowers the tool cost in the final part and enables higher added value to the die casting and injec...

متن کامل

Optimization and utilization of semisolid casting process for semisolid welding of Al-6061 alloy

Semisolid processing is one of the modern routes in sound and near net shape parts production.  Preparation of semisolid slurry using a cooling slope is increasingly becoming popular, primarily because of its simplicity in design and ease of control of the process. In this research, the microstructures of Al6061 semisolid alloy cast via a miniature cooling slope were investigated. The propertie...

متن کامل

A comparison between the dimensions of positive transtibial residual limb molds prepared by air pressure casting and weight-bearing casting methods

Background: Creating a socket with proper fit is an important factor to ensure the comfort and control of prosthetic devices. Several techniques are commonly used to cast transtibial stumps but their effect on stump shape deformation is not well understood. This study compares the dimensions, circumferences and volumes of the positive casts and also the socket comfort between two casting method...

متن کامل

Study of multilayer and multi-component coatings deposited using cathodic Arc technique on H-13 hot work steel for die-casting applications

Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004