Light-Curing Volumetric Shrinkage in Dimethacrylate-Based Dental Composites by Nanoindentation and PAL Study
نویسندگان
چکیده
Light-curing volumetric shrinkage in dimethacrylate-based dental resin composites Dipol® is examined through comprehensive kinetics research employing nanoindentation measurements and nanoscale atomic-deficient study with lifetime spectroscopy of annihilating positrons. Photopolymerization kinetics determined through nanoindentation testing is shown to be described via single-exponential relaxation function with character time constants reaching respectively 15.0 and 18.7 s for nanohardness and elastic modulus. Atomic-deficient characteristics of composites are extracted from positron lifetime spectra parameterized employing unconstrained x3-term fitting. The tested photopolymerization kinetics can be adequately reflected in time-dependent changes observed in average positron lifetime (with 17.9 s time constant) and fractional free volume of positronium traps (with 18.6 s time constant). This correlation proves that fragmentation of free-volume positronium-trapping sites accompanied by partial positronium-to-positron traps conversion determines the light-curing volumetric shrinkage in the studied composites.
منابع مشابه
Shrinkage Characteristics of Experimental Polymer Containing Composites under Controlled Light Curing Modes
The adsorption of polymethylmethacrylate polymer of different molecular weight at the aerosil/ethyleneglycolor 1,3 butanediol-dimethacrylate interfaces was determined to provide microstructured networks. Their structural characteristics were determined to be controlled by the amount of polymer initially supplied to the system. The sediment (the settled phase) characteristics, determined as a fu...
متن کاملMultiaxial Strength and Stress Forming Behavior of Four Light-Curable Dental Composites
The resulting internal stress situation in curing dental composites is still oversimplified due to analytical inaccessibility of local information of state and loading. Similar applies to the strength behavior of cured dental composites. Using recent progress of a finite-element-based curing model, we developed and attempted to benchmark dental composites based on their mechanical behavior and ...
متن کاملEffect of low-shrinkage monomers on the physicochemical properties of experimental composite resin
This study was conducted to determine whether novel experimental low-shrinkage dimethacrylate co-monomers could provide low polymerization shrinkage composites without sacrifice to degree of conversion, and mechanical properties of the composites. Experimental composites were prepared by mixing 28.6 wt% of bisphenol-A-glycidyl dimethacrylate based resin matrix (bis-GMA) with various weight-frac...
متن کاملPolymerization shrinkage, flexural and compression properties of low-shrinkage dental resin composites.
This study evaluated the polymerization shrinkage, flexural and compressive properties of low-shrinkage resin composites. For the study, four methacrylate-based and one silorane-based resin composites were light cured using three different light-curing units (LCUs) and their polymerization shrinkage, flexural (strength (FS) and modulus (FM)) and compressive (strength (CS) and modulus (CM)) prop...
متن کاملSilorane- and high filled-based "low-shrinkage" resin composites: shrinkage, flexural strength and modulus.
This study compared the volumetric shrinkage (VS), flexural strength (FS) and flexural modulus (FM) properties of the low-shrinkage resin composite Aelite LS (Bisco) to those of Filtek LS (3M ESPE) and two regular dimethacrylate-based resin composites, the microfilled Heliomolar (Ivoclar Vivadent) and the microhybrid Aelite Universal (Bisco). The composites (n = 5) were placed on the Teflon ped...
متن کامل