Developments in Superconducting Wires and Magnets
نویسندگان
چکیده
We have been developing superconducting wires and magnets for over 40 years and decided to focus on the NMR field in the early 1990s. Japan Superconductor Technology Inc., established in 2002, has successfully applied the R&D achievement of Kobe Steel to their production of superconducting wires and magnets. This article describes developments in superconducting wires and magnets with focus on the latest development.
منابع مشابه
RECENT DEVELOPMENTS IN SUPERCONDUCTIVITY IN JAPAN The Committee of Superconducting Magnets
Many basic studies OR the superconducting compound wires have been carried out but no practical wires have yet been developed. To get basic data, Nb3Sn, NbB2, NbMoB2, NbS2, NbN, Nb3V, V3Ga, etc. are being studied. The last compound, especially, V3Ga, is being examined with keen interest as a possible practical material that can be produced on an industrial scale. The VjGa is made into a tape wi...
متن کاملNb3Sn Wire Technology for High-field Superconducting Magnet
Nb3Sn superconducting wires are widely used for highfield superconducting magnets, and the NMR magnet is one of the most successful applications. In order to realize a large Jc (critical current density), which is essential to high-field superconducting magnets, several different types of production methods have been developed, such as the bronze-route method, the powderin-tube method and the i...
متن کاملEffects of cold-treatment and strain-rate on mechanical properties of NbTi/Cu superconducting composite wires
During design and winding of superconducting magnets at room temperature, a pre-tension under different rate is always applied to improve the mechanical stability of the magnets. However, an inconsistency rises for superconductors usually being sensitive to strain and oversized pre-stress which results in degradation of the superconducting composites' critical performance at low temperature. Th...
متن کاملMgB Coil Options for Fusion Poloidal Magnets
A hybrid solution is proposed for the IGNITOR research fusion machine by using of superconducting coils for some poloidal magnets, in association with high field copper magnets for the central solenoid and for the toroidal field coils. The choice to be made among the various superconductors is based on the materials performances in high magnetic field, on the mechanical strength of the conducto...
متن کاملSuperconducting Magnets for High Energy
Center With the availability of high energy accelerators the need for powerful experimental, beam transport and special magnets is steadily increasing. Experimental high field large volume watercooled or conventional magnets would have power requirements which would be economically unsound. Superconducting magnets have reached a stage where they can be incorporated in connection with high energ...
متن کامل