Comparative Durability of Untreated Wood in Use Above Ground
نویسنده
چکیده
Cross-brace units constructed of 10 different. softwoods and nine different hardwoods were exposed on a test fence in Wisconsin for up to 22 years. Sapwood was included for all species and heartwood for some. The objective of this study was to determine the above-ground longevity of these woods against decay. The wood was classified into above-ground decay resistance groups. The longevity spans apply only to structural components similar in cross-sectional size to the test units used in this study. Millwork and fencing components may fit into this category. Woods estimated to last more than 20 years above ground, and thus classified as most resistant, included the heartwood of Douglas-fir, western white pine, redwood, Eucalyptus sp., red and white oak, lodgepole pine, ponderosa pine, western red cedar, and the sapwood of redwood, white oak, and red oak. No woods fell into the nonresistant class ( < 7 years expected average life). The remaining woods were classified moderately resistant or resistant based upon service lives of 8 to 13 and 14 to 19 years, respectively.
منابع مشابه
Biological Decay and Termite Resistance of Post- Treated Wood-Based Composites under Protected Above-Ground Conditions: A Preliminary Study after 36 Months of Exposure
Five kinds of commercially available wood-based composites (softwood plywood, hardwood plywood, medium density fiberboard, oriented strand board, and particle board, hereinafter abbreviated as SWP, HWP, MDF, OSB, and PB, respectively) post-treated with alkaline copper quat (ACQ) and copper azole (CA) were exposed to decay and subterranean termite activity under protected above-ground conditions...
متن کاملDurability of thermally modified Norway spruce and Scots pine in above ground conditions
One of the main objectives of thermal modification is to increase the biological durability of wood. In this study the fungal resistance of Norway spruce and Scots pine, thermally modified at 1958C and 2108C, was studied with a lap-joint field test. Untreated pine and spruce and pine impregnated with tributyl tin oxide (TBTO) and copper, chromium and arsenic (CCA) were selected as reference mat...
متن کاملStructural and other properties of modified wood
Wood is not under all circumstances an appropriate building material. Beside others, structural properties and biological durability determine the limits for the use of wood. Until recently, the only industrial applied method to improve the durability of wood was impregnating with toxic wood preservatives. Although much progress has been made in improving the fixation of preservatives (i.e. emi...
متن کاملEnvironmentally Friendly Wood Preservative System Based on Polymerized Tannin Resin-boric Acid for Outdoor Applications♣
Boron compounds are used as wood preservatives as they are both fungicide and insecticide, relatively inexpensive and environmentally acceptable. Nevertheless, in the field of wood protection, borates are only used for indoor non-exposed applications or in association with other biocides, due to their main disadvantage of being readily leachable from treated wood. To overcome this problem, bori...
متن کاملPUBLICATION III Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species
Thermal modification has been developed for an industrial method to increase the biological durability and dimensional stability of wood. In this study the effects of thermal modification on resistance against softand brown-rot fungi of sapwood and heartwood of Scots pine and Norway spruce were investigated using laboratory test methods. Natural durability against soft-rot microfungi was determ...
متن کامل