Influence of Phenyltrimethoxysilane on Physicochemical Properties of Teos Based Monolithic Silica Aerogels Prepared by Supercritical Drying Process

نویسندگان

  • Kavale Mahendra
  • Satish C. Gupta
چکیده

The objective of the present research work is to synthesize transparent, hydrophobic, monolithic silica aerogels with ultralow density by using supercritical drying process. The effect of phenyltrimethoxysilane as a hydrophobic reagent on the physicochemical properties of the silica aerogels has been studied. The total processing time for the synthesis of monolithic silica aerogels minimized to 29 h which was ~2 days. We have succeeded to get ultralow density of the silica aerogels as low as 24 Kgm -3 with 165° water droplet contact angle. The ultralow density affects the thermal conductivity of the silica aerogels.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of the drying conditions on the microstructure of silica based xerogels and aerogels.

Nanostructured silica based xerogels and aerogels are prepared by sol-gel technology, using methyltrimethoxysilane as precursor. The influence of the drying method and conditions on the microstructure of the obtained materials is investigated, since the drying stage has a critical influence on their porosity. Two types of drying methods were used: atmospheric pressure drying (evaporative), to p...

متن کامل

Production of Spherical Aerogel Microparticles by Supercritical Extraction of Emulsion

Due to high surface area, low density, open pore structure and excellent insulation properties aerogels were intensively investigated in the past decades for diverse range of applications. The state of the art of aerogel production by supercritical drying is to produce monolithic aerogel, where the sol is aged in molds and dried by extraction with supercritical CO2. Aerogels in form of spherica...

متن کامل

A Review of Aerogel Applications in Adsorption and Catalysis

Aerogels are a special class of porous material, which have excellent physicochemical properties such as low density, high porosity, high surface area and adjustable surface chemistry. Aerogels were first prepared several decades ago, but never truly commercialized due to their high cost. Technological advancements in the production and quality of different types of aerogel cut costs down and m...

متن کامل

A Continuous Extraction and Pumpless Supercritical CO2 Drying System for Laboratory-Scale Aerogel Production

Production of aerogels starts with solution chemistry and may end with supercritical carbon dioxide drying, which both require a specialized system. Here we present a complete aerogel production system that was developed and used in our laboratory over the last nine years. Our aim was to develop a supercritical dryer and a protocol, whereby the CO2 pump can be left out, and the entire flow syst...

متن کامل

Density and refractive index of silica aerogels after low- and high-temperature supercritical drying and thermal treatment

This paper reports on the density of silica aerogels after lowand high-temperature supercritical drying as well as on the corresponding optical refractive index. The influence of adsorbed water or methanol has also been investigated. Aerogel samples are prepared via soI3el process of pH 11 and pH 13 tetramethoxysilanehnethanolfwater solutions using ammonia as catalyst. After high-temperature dr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012