DC and RF Characteristics of Advanced MIM Capacitors for MMIC’s Using Ultra-Thin Remote-PECVD Si N Dielectric Layers
نویسندگان
چکیده
We have fabricated advanced metal–insulator–metal (MIM) capacitors with ultra-thin (200 Å) remote-PECVD Si3N4 dielectric layers having excellent electrical properties. The breakdown field strength of MIM capacitors with 200-Å-thick Si3N4 was larger than 3.5 MV/cm, which indicates the excellent quality of the deposited Si3N4 film. The main capacitance per unit area extracted by radio frequency (RF) measurements was as high as 2900 pF/mm. Tenfold reduction of MIM capacitor size was successfully performed compared with conventional MIM capacitor with 2000-Å PECVD Si3N4 dielectric layer. Despite ultra-thin dielectric films of 200-Å thickness, the fabricated MIM capacitors showed good RF performance and high yield.
منابع مشابه
A Mim Capacitor Study of Dielectric Charging for Rf Mems Capacitive Switches
MIM capacitors are considered equally important devices for the assessment of dielectric charging in RF MEMS capacitive switches. Beside the obvious similarities between the down state condition of RF MEMS and MIM capacitors there are also some important differences. The paper aims to introduce a novel approach to the study of dielectric charging in MEMS with the aid of MIM capacitors by combin...
متن کاملReliability issues of double gate dielectric stacks based on hafnium dioxide (HfO2) layers for non-volatile semiconductor memory (NVSM) applications
In this study, we present selected reliability issues of double gate dielectric stacks for non-volatile semiconductor memory (NVSM) applications. Fabricated gate structures were consisted of PECVD silicon oxynitride layer (SiOxNy) as the pedestal layer and hafnium dioxide layer (HfO2) as the top gate dielectric. In the course of this work, obtained MIS structures were investigated by means of c...
متن کاملThe Effect of Different Dielectric Materials in Designing High Performance Metal-Insulator-Metal (MIM) Capacitors
Received Jan 24, 2017 Revised Mar 30, 2017 Accepted Apr 15, 2017 A Metal-Insulator-Metal (MIM) capacitor with high capacitance, high breakdown voltage, and low leakage current is aspired so that the device can be applied in many electronic applications. The most significant factors that affect the MIM capacitor’s performance is the design and the dielectric materials used. In this study, MIM ca...
متن کاملEffects of Deposition Method of PECVD Silicon Nitride as MIM Capacitor Dielectric for GaAs HBT Technology
Thin silicon nitride (Si3N4) films deposited using plasma-enhanced chemical deposition (PECVD) method have been used as metalinsulator-metal (MIM) capacitor dielectric for GaAs heterojunction bipolar transistor (HBT) technology. The characteristics of the films, which were deposited at 300C, were found to be dependent on how the PECVD film was deposited. A silicon nitride film deposited as a mu...
متن کاملModeling the voltage nonlinearity of high-k MIM capacitors
Voltage nonlinearity is a crucial performance parameter of MIM capacitors for RF, analog and mixed signal IC applications. In present work, the fabrication and characterization of anodic high-k MIM capacitors are reported in detail and modeling of nonlinearity coefficient of capacitance is developed using polarization of induced dipoles. The model agrees with experimental results for various hi...
متن کامل