Natural Tannin-based Rigid Foams as Insulation for Doors and Wall Panels
نویسندگان
چکیده
Tannin-based rigid foams were shown to be good thermal insulating materials for use in the cavity of hollow-core wooden doors and other wooden cavities. Their thermal insulation capacity is comparable to that of totally synthetic, oil-derived foams, such as polyurethanes, but with the advantage that they do not burn and thus do not emit toxic gases on burning. Exposure to the weather of wooden hollow core structures fi lled with tannin-based foams confi rm that the wood in contact with the foam is not affected by the acidity of the foam due to the already previously demonstrated incorporation of the acid hardener used by coreaction with the hardened polymer network.
منابع مشابه
Chemical Modification of Tannin/furanic Rigid Foams by Isocyanates and Polyurethanes
Tannin/furanic rigid foams were modi ed by either polymeric 4,4’ diphenylmethane diisocyanate (pMDI) or a one-component polyurethane still presenting reactive isocyanate groups (PUR). Several di erent sequences of mixing the isocyanate and polyurethane with the chemicals used to prepare tannin-based foams were tested. Scanning electron microscopy (SEM) showed that addition of either pMDI or PUR...
متن کاملThermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models
The loss of energy especially in industrial and residential buildings is one of the main reasons of increased energy consumption. Improving the thermal insulation properties of materials is a fundamental method for reducing the energy losses. Polymeric foams are introduced as materials with excellent thermal insulation properties for this purpose. In the present study, a deep theoretical invest...
متن کاملTechnical and Economical Evaluation of Vacuum Insulated Panels for A European Freezer
Vacuum insulated panels (VIP) is an emerging technology that may constitute an alternative to rigid polyurethane (RPU) foam as insulation in refrigerators and freezers. The "skin effect" caused by the aluminum layer in the envelope complicates the evaluation of the global thermal resistance. This article present a new method of VIP characterization. Values of the global thermal resistance obtai...
متن کاملPii: S1359-6462(00)00548-0
Al foams have found increasing applications in a wide range of structural and functional products, due to their exceptional mechanical, thermal, acoustic, electrical and chemical properties [1–3]. Al foam structures have densities only fractions of that of a solid structure and therefore have high specific strength and stiffness. They also have excellent properties for impact energy, vibration ...
متن کاملComparison And Validation Of Modelling Methods For Non-Homogenous Walls Incorporating Vacuum Insulation Panels
This paper compares the effective thermal resistance of 5 wall assemblies incorporating vacuum insulation panels (VIP) encased in extruded polystyrene (XPS), known as composite panels, through three different evaluation methods. The methods consisted of using steady-state and in-situ experimental testing as well as computer simulation. The computer modelling of the wall assemblies used simplifi...
متن کامل