A thermodynamical and structural study on the complexation of trivalent lanthanides with a polycarboxylate based concrete superplasticizer.

نویسندگان

  • Daniel R Fröhlich
  • Martin M Maiwald
  • Franziska Taube
  • Johann Plank
  • Petra J Panak
چکیده

The complexation of trivalent lanthanides with a commercial polycarboxylate based concrete superplasticizer (Glenium® 51) is investigated using different spectroscopic techniques. Time-resolved laser fluorescence spectroscopy (TRLFS) in combination with a charge neutralization model is used to determine temperature dependent conditional stability constants (log β'(T)) for the complexation of Eu(iii) with Glenium® 51 in 0.1 mol kg-1 NaCl solution in the temperature range of 20-90 °C. Only one complex species is observed, and log β'(T) (given in kg per mol eq) shows a very slight increase with temperature from 7.5 to 7.9. The related conditional molar reaction enthalpy (ΔrH'm) and entropy (ΔrS'm) obtained using the Van't Hoff equation show that the complexation reaction is slightly endothermic and entropy driven. The thermodynamic investigations are complemented by structural data for complexes formed with Gd(iii) or Tb(iii) and Glenium® 51 using extended X-ray absorption fine structure (EXAFS) spectroscopy. The results imply a non-chelate coordination of the trivalent metals through approximately three carboxylic functions of the polycarboxylate comb polymer which are attached predominantly in a bidentate fashion to the lanthanide under the given experimental conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mix Design Selection For Old and New Generation of SuprePlasticizers

Determination the optimal mix design plays an important role in order to gain the maximum characteristic strength. This research was conducted as a case study for Manjil tunnel project located in Qazvin-Rasht highway. For this purpose, 18 concrete mix designs were prepared at the study phase of the project with specifications such as conventional water-to-cement ratios of 0.4, 0.5 and 0.6, the ...

متن کامل

Performance of Concrete Made with Superplasticizer from Modified Black Liquor and Polycarboxylate

A new kind of retarding polycarboxylate superplasticizer (M20S80) was prepared through the modification of black liquor and polycarboxylate superplasticizer (S) through an Fe-H2O2 reaction system. The synthesis process of M20S80 was introduced. Infrared spectrum analysis (FT-IR) was used to investigate the changes in functional groups in M20S80. At the same time, a mixture of LM20S80 was made b...

متن کامل

The Influence of Graphene Oxide on Mechanical Properties and Durability Increase of Concrete Pavement

Herein, the performance of graphene oxide (GO) in improving mechanical properties and subsequently reducing the permeability of cement composites used in concrete pavement, is studied. A polycarboxylate superplasticizer was used to improve the dispersion of GO flakes in the cement. The mechanical strength of graphene-cement nanocomposites containing 0.1–2 wt% GO and 0.5 wt% superplasticizer was...

متن کامل

Research on Chloride Penetration Resistance of Phosphoaluminate Cement Concrete

The chloride penetration resistance of phosphoaluminate cement (PAC) concrete was investigated in this study. The effects of mixture proportioning parameters, including cement content, water–cement ratio (w/c), and superplasticizer content on chloride ion penetration resistance of PAC concrete were investigated by the rapid chloride migration test (RCM). The result shows that the increase of ce...

متن کامل

Preparation, Characterization and Performances of Powdered Polycarboxylate Superplasticizer with Bulk Polymerization

A polycarboxylate superplasticizer (PCE) was synthesized in a non-solvent system with bulk polymerization and then was pulverized into powdered form to achieve a rapid transportation and convenient preparation. PCE synthesized by using isopentenyl polyethylene glycol (TPEG) or isobutenyl polyethylene glycol (IPEG) as a macromonomer exhibited the best fluidities and retaining properties at 80 °C...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dalton transactions

دوره 46 12  شماره 

صفحات  -

تاریخ انتشار 2017