Power Cable Joint Model: Based on Lumped Components and Cascaded Transmission Line Approach
نویسندگان
چکیده
Abstract: Models in high frequency range for underground power cable connections are essential for the interpretation of partial discharge (PD) signals arising e.g. diagnostic techniques. This paper focuses on modeling of power cable joints. A lumped parameter odel and a cascaded transmission line model are proposed based on scattering parameters (S -parameters) measurement on a 10 kV oil-filled PILC-PILC straight cable joint in the frequency range of 300 kHz-800 MHz. It is shown that the lumped model is suitable for up to 10 MHz while the transmission line model can cover the whole frequency range. The cascaded transmission line model is applied to simulate the reflection on a 150 kV single core XLPE straight joint. Comparison between measurement and simulation indicates that the model parameters (characteristic impedance and propagation coefficient) can be matched to predict the joint’s propagation characteristics.
منابع مشابه
A Modeling Approach for Electric Power Transmission Lines in the Presence of Non-Fundamental Frequencies
A Modeling Approach for Electric Power Transmission Lines in the Presence of Non-Fundamental Frequencies Valentina Cecchi Karen Miu, Ph.D. In light of the fact that modern power systems are expected to exhibit an increased level of harmonic and inter-harmonic frequency components, a modeling tool for electric power transmission lines was developed to determine the appropriate model structure un...
متن کاملTransmission switching cost modeling and determination candidate Lines for participation in joint energy and reserve markets
There is a great resolution calling for smart grids in recent years. Introduction of new technologies, that make the network flexible and controllable, is a main part of smart grid concept and a key factor to its success. Transmission network as a part of system network has drawn less attention. Transmission switching as a transmission service can release us from load shedding and remove the co...
متن کاملتخمین عمر عایقی کابل های فشار قوی XLPE تحت تنش های حرارتی، الکتریکی و همزمان
The aging of insulating materials can be estimated by an electrical breakdown occurring in electrical components so that the relationship between lifetime, failure probability and reliability of electrical components may be studied using the life models in high voltage cables networks. In last decades with attention to higher features as electrical, thermal, mechanical characteristic, widely cr...
متن کاملMiniaturized Gysel Power Dividers Using Lumped-Element Components
This letter presents miniaturized Gysel power dividers using lumped-element components. The characteristic impedances of all the equivalent transmission lines in these dividers are fixed to the same values based on even and odd mode analysis, thus simplifying the design procedure and miniaturizing the Gysel power dividers. The ideal divider designed at a frequency of 590MHz exhibits power split...
متن کاملPlasmonic bandpass filters with cascaded rectangular ring resonators.
We theoretically present the analysis and design of a nanoplasmonic bandpass filter with flat-top spectral characteristics by cascading a series of directly connected rectangular ring resonators based on metal-insulator-metal waveguides. Analyzed by the equivalent lumped circuit model of the transmission line to plasmonic waveguides, the transmission properties of a symmetric rectangular ring r...
متن کامل