Evolution of sputtered tungsten coatings at high temperature
نویسندگان
چکیده
Related Articles Stability of deflected-beam metal–insulator–metal tunneling cathodes under high acceleration voltage J. Vac. Sci. Technol. B 31, 042203 (2013) Simple Si(111) surface preparation by thin wafer cleavage J. Vac. Sci. Technol. A 31, 023201 (2013) Novel techniques for modifying microtube surfaces with various periodic structures ranging from nano to microscale J. Vac. Sci. Technol. B 31, 011806 (2013) Decomposition and phase transformation in TiCrAlN thin coatings J. Vac. Sci. Technol. A 30, 061506 (2012) Surface modification of gold–carbon nanotube nanohybrids under the influence of near-infrared laser exposure J. Vac. Sci. Technol. B 30, 03D119 (2012)
منابع مشابه
Thick Sputtered Tantalum Coatings for High-Temperature Energy Conversion Applications
Thick sputtered tantalum (Ta) coatings on Inconel were investigated as a potential replacement for bulk refractory metal substrates used for high-temperature emitters and absorbers in thermophotovoltaic energy conversion applications. In these applications, high-temperature stability and high reflectance of the surface in the infrared wavelength range are critical in order to sustain operationa...
متن کاملThe in ̄uence of small additions of Ni, Ti and C on the oxidation behaviour of sputtered tungsten coatings
The oxidation rate of sputtered tungsten-based coatings, oxidised in air at temperatures of 6008C±8008C can be in ̄uenced signi®cantly by the addition of small amounts of nickel, titanium and carbon. The presence of carbon does not change the type of oxide phases formed during the oxidation of sputtered W coatings: there are two oxide layers, the inner being a compact sub-oxide of WOx type and t...
متن کاملEffect of Substrate Bias Voltage and Ti Doping on the Tribological Properties of DC Magnetron Sputtered MoSx Coatings
Molybdenum disulfide (MoS2) is one of the most widely used solid lubricants. In this work, composite MoSx/Ti coatings were deposited by direct-current magnetron sputter ion plating onto plain carbon steel substrates. The MoSx/Ti ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the coatings were explored using...
متن کاملMorphological and structural evolution of WS2 nanosheets irradiated with an electron beam.
The morphological and structural evolution of WS2 nanosheets under electron irradiation is investigated using high-resolution transmission electron microscopy. During irradiation, the sulfur atoms that interacted with the electrons were sputtered first and the tungsten atoms began to sputter when the surrounding sulfur atoms had been sputtered. With an increasing irradiation time, the remaining...
متن کاملCOMPARISON OF ELECTRODEPOSITION ASPECTS AND CHARACTERISTICS OFNi-WAND Co-WALLOYNANOCRYSTALLINE COATINGS
Abstract: current densities. Electrochemical impedance spectroscopy (EIS) results showed that the codeposition mechanism oftungsten in Ni-W deposition is the reduction of tungsten oxide which changed to the reduction of tungsten-containingion complexes at higher current densities. In Co-W electrodeposition, the tungsten codeposition takes place viareduction of tungsten oxide, although, the role...
متن کامل