Dry etching characteristics of amorphous As2S3 film in CHF3 plasma
نویسندگان
چکیده
The authors describe the dry etching characteristics of amorphous As2S3 films in CHF3 plasma and the development of an optimized fabrication process for compact waveguides. The observed etching behavior is due to the relative densities of fluorine atoms, polymer precursors, and ions in the plasma which are controlled by the process parameters. In particular, the flow rate of the CHF3 gas has a significant influence on the etched profile and surface roughness as well as the etch rate of the As2S3. The profile evolves from isotropic to vertical with the flow rate due to passivation by increasing polymer deposition on the sidewalls. Such passivation also helps achieve smooth sidewalls because it inhibits differential etching between the phases in the inherently phase-separated As2S3 film, which otherwise results in a grainy and rough etched surface. At the highest flow rate, however, excessive polymer deposition occurs and this results in positive-sloped sidewall and grassy etched surface due to micromasking. © 2008 American Institute of Physics. #DOI: 10.1063/1.3041647$
منابع مشابه
Nanoscale phase separation in ultrafast pulsed laser deposited arsenic trisulfide „As2S3... films and its effect on plasma etching
We have observed nanoscale phase separation in amorphous arsenic trisulfide As2S3 films produced by ultrafast pulsed laser deposition and its effect on the surface morphology of the film after plasma etching. When the film was etched in CF4–O2 plasma, a grainy structure was observed on the surface. From Raman and x-ray photoelectron spectroscopies, we concluded that the grainy structure of the ...
متن کاملDry-etch of As2S3 thin films for optical waveguide fabrication
Plasma etching to As2S3 thin films for optical waveguide fabrication has been studied using a helicon plasma etcher. The etching effects using the processing gases or gas mixtures of O2, Ar, and CF4 were compared. It was found that the O2 plasma had no chemical etching effect to the As2S3, but it could oxidize the surface of the As2S3. The Ar plasma provided a strong ion sputtering effect to th...
متن کاملCharacterizing fluorocarbon assisted atomic layer etching of Si using cyclic Ar/C4F8 and Ar/CHF3 plasma.
With the increasing interest in establishing directional etching methods capable of atomic scale resolution for fabricating highly scaled electronic devices, the need for development and characterization of atomic layer etching processes, or generally etch processes with atomic layer precision, is growing. In this work, a flux-controlled cyclic plasma process is used for etching of SiO2 and Si ...
متن کاملRole of steady state fluorocarbon films in the etching of silicon dioxide using CHF3 in an inductively coupled plasma reactor
It has been found that in the etching of SiO2 using CHF3 in an inductively coupled plasma reactor of the planarized coil design, a thin steady state fluorocarbon film can play an important role in determining the rate of etching. This etching is encountered as the amount of bias power used in the SiO2 etching process is increased, and a transition from fluorocarbon film growth on the SiO2 to an...
متن کاملFabrication of suspended dielectric mirror structures via xenon difluoride etching of an amorphous germanium sacrificial layer
The authors present a simplified fabrication method for the creation of free-standing dielectric mirrors for use in monolithic wavelength tunable surface-normal photonic devices, including vertical-cavity surface emitting lasers. This process utilizes a nonplasma dry etching process, based on the noble gas halide, xenon difluoride XeF2 , to remove an inorganic sacrificial film comprised of low-...
متن کامل