Online Estimation of Engine Driveline Dynamic Properties
نویسنده
چکیده
This paper investigates the dynamics of the engine driveline system for achieving accurate and online diagnostics of engine conditions using instantaneous angular speed (IAS). Based on a state space modelling approach and key structures of the system, a torsional vibration model is developed and its modal properties: modal frequency, damping ratio and shapes are evaluated. Then taking the output data from the model as the input a latest stochastic subspace identification (SSI) method was implemented and result shows that the SSI approach is sufficiently accurate to extract these modal properties. Moreover, experimental studies show that the SSI approach can correctly extract modal properties under the low frequency range of interest based on just the transient IAS data acquired during engine shutdown, which confirms the theoretical analysis and provides the basis for the subsequent IAS based diagnosis development in which modal characteristics will be taken into account. Keywords—Instantaneous angular speed; modal identification; Output only modal identification; SSI
منابع مشابه
Identification of Driveline Parameters Using an Augmented Nonlinear Model
Modern approaches for engine control assume the knowledge of the dynamic properties connecting the engine via driveline to the road. A formally identical problem arises when a combustion engine is operated on a test bench, with an electrical machine simulating the wheel load. While in some cases design information allows sufficient estimation of the parameters, in many other cases it may prove ...
متن کاملLink oping Studies in Science
A vehicular driveline is the system used to transfer engine torque to the wheels. Resonances in the elastic parts of the driveline are important to handle when control of the engine and the transmission is optimized. Gear shifting by engine control is a new approach for automatic gear shifting with disengaging the clutch replaced by engine control. Resonances are excited in an uncontrolled driv...
متن کاملDriveline Modeling and Principles for Speed Control and Gear-Shift Control
i Abstract A vehicular driveline consists of engine, clutch, transmission, shafts, and wheels, which are controlled by a driveline management system. Experiments and modeling using a heavy truck show that there are significant torsional resonances in the driveline. A linear model with a drive shaft flexibility is able to sufficiently explain the measured engine speed and wheel speed. Engine con...
متن کاملDriveline modeling and estimation of individual clutch torque during gear shifts for dual clutch transmission
The purpose of the proposed work centers on the unprecedented task of accurately estimating the torque transmitted through each clutch of the dual clutch transmission. This is to possibly improve the clutch control performance during vehicle launch and gearshifts and to elongate the clutch life. Such goal is attained by only using the measurements and data that are already available in current ...
متن کاملInstitutionen För Systemteknik Driveline Observer for an Automated Manual Gearbox Driveline Observer for an Automated Manual Gearbox Examensarbete Utfört I Fordonssystem Vid Tekniska Högskolan I Linköping Av
The Automated Manual Transmission system Opticruise is dependent on signals from sensors located in different parts of the Scania trucks. These signals are of different qualities and have different update frequencies. Some signals and quantities that are hard or impossible to measure are also of importance to this system. In this thesis a driveline observer for the purpose of signal improvement...
متن کامل