Influence of Ferromagnetic Layer on Critical Current of a Superconducting Wire
نویسندگان
چکیده
We investigated how a 10–50 μm layer from soft ferromagnetic material, incorporated in the architecture of a composite superconducting tape, could influence the capability of the tape to transport electrical current. Numerical procedure was developed to calculate the local distribution of magnetic field and current in the condition when all the superconductor is carrying its critical current density. It was found that the concentration of magnetic flux in ferromagnetic layers allows to reduce the local value of magnetic flux density felt by the superconductor. In this way, the critical current of the tape in low applied magnetic fields can be improved. This theoretical prediction is confirmed by experimental observation.
منابع مشابه
مشخصات پیوندگاههای ابررسانا - فرومغناطیس - ابررسانا با پایانههای ابررسانای یکتایی
We study numerically the electronic heat capacity, spin and charge current in a diffusive Superconductor-Ferromagnetic-Superconductor systems، with singlet superconducting leads and non-uniform ferromagnetic layer. Specially, we focus on ferromagnetic layer with domain wall and conical structures incorporation the spin-active interfaces. We investigate, how the 0-π transition is influenced by n...
متن کاملMagnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts
The current distribution and the AC loss in a composite superconducting tape containing a layer from magnetic material is calculated and compared with experiments, showing a very good agreement. The situations of an alternating uniform applied field or a transport current are studied. The newly developed numerical model is an approximation to the critical state model, adapted for the applicabil...
متن کاملInfluence of Fault Current Limiter in Voltage Drop and TRV Considering Wind Farm
Influence of distributed generation systems in the distribution systems can increase the level of short-circuit current. The effectiveness of distributed generation systems is affected by the size, location, type of distributed generation systems technology, and the methods of connecting to distribution systems. Wind turbine system is the examples of distributed generation source. Not only does...
متن کاملOptimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
متن کاملFlux triggered normal to superconducting transitions in F/I/S narrow stripes
We studied superconducting to normal state current-driven transitions in Ferromagnetic Cobalt/Cobalt Oxide/Superconducting Indium stripes of widths ranging from 3 lm to 20 lm. The narrower stripes can be set up in a high or low critical current state by driving the magnetic domain structure of the thin Co film either in an almost uniform or non-uniform state of magnetization. In the first case ...
متن کامل