Printing ink and paper recycling sources of TMDD in wastewater and rivers.

نویسندگان

  • Arlen A Guedez
  • Wilhelm Püttmann
چکیده

2,4,7,9-Tetramethyl-5-decyne-4,7-diol (TMDD) is a non-ionic surfactant which is preferentially used as defoamer in paints and printing ink and for the treatment of surfaces. Effluents of wastewater treatment plants (WWTPs) have been identified as the domination point sources for TMDD in rivers since the removal rate of the compound in the WWTPs is in general less than 70%. However, the dominating entry pathways of TMDD into the sewage were unknown so far. In this study effluents from both, municipal WWTPs with and without treatment of indirect industrial dischargers and from industrial WWTPs with direct discharge of wastewater into receiving rivers were analyzed for the first time to identify the proportions of TMDD coming from domestic wastewater and from various industrial sources. Moreover, rivers were samples before and after the influent of sewage water from WWTPs. The TMDD concentrations in the water samples were measured using solid phase extraction (SPE) followed by gas chromatography/mass spectrometry (GC/MS). High TMDD concentrations were found in rivers (up to 63.5 μg/L), and in effluents of WWTPs (up to 310 μg/L) affected by wastewater from paper recycling industry and factories producing paint and printing ink. Concentrations of TMDD revealed to be far higher in wastewater from factories processing recycled paper (up to 113 μg/L) compared to wastewater from factories not processing recycled paper (0.066 μg/L). The results indicate that the use of recycling paper in the paper production process is the dominating reason for increased TMDD concentrations in wastewaters and receiving rivers due to the wash out of TMDD from the paper impregnated with printing ink. Very high TMDD concentrations (up to 3300 μg/L) were also detected in wastewater from a printing ink factory and a paint factory.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Ink Formulation and Paper Surface Morphology on Ink-jet Printing Properties

The purpose of this study was to investigate the effect of type of alcohols and humectants in inks formulation, and the papers surface morphology on the ink-jet printing properties. In order to investigate the influence of alcohol and humectant types on printing properties, the optimum ink formulation from previous study, which contained C.I. Reactive Blue 21 Ink2 was formulated with different ...

متن کامل

Evaluating the Effect of Reactive Dye’s Structure and Penetrant Type on the Fastness of Ink-Jet Prints

The purpose of this study was to investigate the effect of the reactive dye structure and type of penetrant in ink formulation on paper ink-jet printing. Different type of papers, which have same grammage was printed upon with three commercial reactive dyes, CI Reactive Blue 49 Ink 1, 4, CI Reactive Blue 21 Ink 2, Ink 5 and CI Reactive Blue 19 Ink 3, Ink 6, which are based on different reactive...

متن کامل

Preparation of Reversible Thermochromic Ink for Flexography Printing on Paper and Study its Colorimetric Properties

Thermochromic printing inks could be security inks which respond to the color change when are being exposed to different temperatures. These inks with unusual chemical and physical specific characteristics are mostly produced for flexographic, screen and rotogravure printing systems under the supervision of skilled technical experts and with precise security controls. Since flexographic thermoc...

متن کامل

Ink-Jet Printing Cotton with Cationic Reactive Dye Based Inks

The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...

متن کامل

Water Fast of Inkjet Print by Using Acrylic /Nano-Silver Ink

A colour ink jet printing with improved water fastness property was produced by using of special component in the ink’s formulation. In this study, the water fastness of ink jet prints which used acrylic/nano-silver resin nano-composite ink instead of conventional resin in ink’s formulation was examined. The nano composite resin was prepared via miniemulsion polymerization of acrylate monomers ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Science of the total environment

دوره 468-469  شماره 

صفحات  -

تاریخ انتشار 2014