Optimized Parameter Combinations of Hydraulic Damper Modules
نویسنده
چکیده
This paper is devoted to the problem of finding optimized parameter combinations of automotive damper modules. Different cost functions using the amplitude spectrum of the excitation and the frequency response function of the car model will be investigated and it is shown that for three different arbitrary road excitations there exists a parameter combination of top mount stiffness, piston rod mass and damping constant that provides an optimum for the dynamic wheel load fluctuation. The achieved advantage of the optimized damper module regarding the dynamic wheel load fluctuation compared to a simple damper in a two mass vibration system can reach up to 20 percent.
منابع مشابه
NEW OPTIMIZED EQUATIONS WITH INTELLIGENT MODELS FOR PREDICTING HYDRAULIC JUMP CHARACTERISTICS OVER ARTIFICIAL AND NATURAL ROUGH BEDS
The available studies for estimating the characteristics of hydraulic jump are only for artificial or natural beds, and very limited researches have simultaneously considered artificial and natural beds. The aim of this study is to present comprehensive equations and models for predicting the characteristics of hydraulic jump in artificial and natural rough beds with various dimensions, arrange...
متن کاملOptimization Design of Coupling Beam Metal Damper in Shear Wall Structures
The coupling beam damper is a fundamental energy dissipation component in coupling shear wall structures that directly influences the performance of the shear wall. Here, we proposed a two-fold design method that can give better energy dissipation performance and hysteretic behavior to coupling beam dampers. First, we devised four in-plane yielding coupling beam dampers that have different open...
متن کاملDevelopment of a Semi-active Car Suspension Control System Using Magneto-rheological Damper Model
In this paper, the development of a semiactive suspension control of quarter car model using fuzzy-based controller has been done. The quarter car model to be used here can be described as a nonlinear two degrees of freedom system which is subject to excitation from different road profile. The semi-active control is designed as the fuzzy control inferred by using two single input rule fuzzy mod...
متن کاملSemi-active H∞/LPV control for an industrial hydraulic damper
In this paper, a new control strategy is developed to improve comfort and roadholding of a ground vehicle equipped with an industrial damper. This damper can be controlled by means of a small servomechanism which adjusts the damping rate. The main controller is a linear parameter varying (LPV ) static state-feedback controller synthesized in the H∞/LPV framework to compute the required damping ...
متن کاملOptimisation of shock absorber process parameters using failure mode and effect analysis and genetic algorithm
The various process parameters affecting the quality characteristics of the shock absorber during the process were identified using the Ishikawa diagram and by failure mode and effect analysis. The identified process parameters are welding process parameters (squeeze, heat control, wheel speed, and air pressure), damper sealing process parameters (load, hydraulic pressure, air pressure, and ...
متن کامل