Fault Tolerant Mpc with an Embedded Fdi System
ثبت نشده
چکیده
The fault detection and isolation (FDI) in industrial processes has been under an active study during the last decade, but fault tolerant control applications relying to the traditional FDI methods have been scarce. In this paper a fault tolerant model predictive controller (MPC) with an embedded FDI system is developed for controlling a simulated heavy oil fractionator process, the Shell Control Problem (SCP). Two different kinds of FDI systems are used for achieving the fault tolerance in co-operation with MPC: system based on Principal Component Analysis (PCA) and Partial Least Squares (PLS) and a system based on Subspace Model Identification (SMI). The effectiveness of selected methods was successfully tested by introducing bias and drift faults to simulated process measurements. Finally the results are presented and discussed. Copyright © 2006 IFAC
منابع مشابه
Fault-tolerant Control for Constrained Linear Systems Based on Mpc and Fdi
This paper considers fault-tolerant control (FTC) for constrained linear systems subject to partial actuator failures. An active fault-tolerant control scheme based on model predictive control (MPC) and fault detection and isolation (FDI) is proposed. The FDI module using a two-stage Kalman filtering algorithm provides simultaneous control parameter and state estimation, which are used to modif...
متن کاملAn embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process
Fault detection and isolation (FDI) for industrial processes has been actively studied during the last decades. Traditionally, the most widely implemented FDI methods have been based on model-based approaches. In modern process industry, however, there is a demand for data-based methods due to the complexity and limited availability of the mechanistic models. The aim of this paper is to present...
متن کاملIntegrating Fuzzy based Fault diagnosis with Constrained Model Predictive Control for Industrial Applications
An active Fault Tolerant Model Predictive Control (FTMPC) using Fuzzy scheduler is developed. Fault tolerant Control (FTC) system stages are broadly classified into two namely Fault Detection and Isolation (FDI) and fault accommodation. Basically, the faults are identified by means of state estimation techniques. Then using the decision based approach it is isolated. This is usually performed u...
متن کاملSet-valued Observer-based Active Fault-tolerant Model Predictive Control
This paper proposes an integrated actuator and sensor active fault-tolerant model predictive control (FTMPC) scheme. In this scheme, fault detection (FD) is implemented by using a set-valued observer, fault isolation (FI) is done by set manipulations and faulttolerant control (FTC) is carried out through the design of a robust model predictive control (MPC) law. In this paper, a set-valued obse...
متن کاملFault Tolerant Control (FTC) Scheme for Unmanned Aerial Vehicles (UAV)
The main focus of this paper is fault-tolerant control systems (FTCSs) for unmanned aerial vehicles (UAVs). The goals are to develop an Automatic-Flight Control System (AFCS)[8], based on fault detection and isolation (FDI) and a reconfiguration mechanism to accommodate them [7]. This paper describes a design approach of Model Predictive Control (MPC) with a linear internal model to achieve a l...
متن کامل