Numerical and Experimental Analysis of Electromagnetic Coupling between Probes in a Cylindrical Metallic Cavity
نویسندگان
چکیده
The procedure for analysis of electromagnetic field in a cylindrical metallic cavity, based on reflection and transmission characteristic, is presented in the paper. An analysis of procedure efficiency to resonant modes identification is conducted numerically and experimentally verified. As a numerical tool, TLM time-domain method, enhanced with the compact wire model to account for the presence of feed and monitoring probes, is used. Results obtained using reflection and transmission procedure are compared, in terms of modes identification and resonant frequency dependence of probe dimensions. Key-Words: Cavity, Wire, Probe, TLM Time-Domain Method, Reflection, Transmission
منابع مشابه
Numerical and Experimental Analysis of Electromagnetic Field in a Probe Coupled Cylindrical Metallic Cavity
The procedure for analysis of electromagnetic field in a cylindrical metallic cavity, based on reflection and transmission characteristic, is presented in the paper. An analysis of procedure efficiency to resonant modes identification is conducted numerically and experimentally verified. As a numerical tool, TLM time-domain method, enhanced with the compact wire model to account for the presenc...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with/without Cutout Under Cyclic Combined and Axial Loading
Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...
متن کاملExperimental and Numerical Investigation of Thickness on the Shrinkage and out of Roundness in Cylindrical Parts in Injection Molding Process
Injection molding process is one of the most important methods of forming in the plastics manufacturing industry. Shrinkage and out of roundness are phenomenons that affect the final product quality. In this study, the effect of the thickness of cylindrical parts from polypropylene material on shrinkage and out of roundness has been investigated. For this purpose, injection molding process is s...
متن کاملA Wideband High-gain Stacked Cylindrical Dielectric Resonator Antenna
Abstract—A new wideband and high-gain dielectric resonator antenna (DRA) is proposed. Three cylindrical dielectric resonators (DRs) with different materials and different sizes and a metallic cylinder are designed to obtain a wideband bandwidth and a high gain. The stacked structure provides a wideband bandwidth, and the cavity formed by the metallic cylinder provides a high gain. The measured ...
متن کاملQuantitative IR Thermography for continuous flow microwave heating
The work here presented proposes an enhanced procedure to describe bulk temperature profiles in pipe flow subjected to microwaves, by means of on-line infrared temperature readouts. Such procedure is intended to overcome the well-known difficulties connected with temperature readings while microwave heating takes place. In facts, temperatures are usually measured onto few points by means of fib...
متن کامل