Neural Networks Assessment of Beam-to-Column Joints
نویسندگان
چکیده
This paper proposes the use of artificial neural networks to predict the flexural resistance and initial stiffness of beam-to-column steel joints using the back propagation supervised learning algorithm. Three types of steel beam-to-column joints were investigated: welded, endplate and bolted with top, seat and double web angles, respectively. The neural networks results proved to be consistent with experimental and design code reference values.
منابع مشابه
AN OPTIMIZATION PROCEDURE FOR CONCRETE BEAM-COLUMN JOINTS STRENGTHENED WITH FRP
This paper illustrates an optimization procedure of concrete beam-column joints subjected to shear that are strengthened with fiber reinforced polymer (FRP). For this aim, five different values have been considered for length, width and thickness of the FRP sheets which created 125 different models to strengthen of concrete beam-column joints. However, by using response surface methodology (RSM...
متن کاملNumerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملEvaluating Weld Magnification Factor in Welded Tubular Joints Using Artifitial Neural Networks
In welded tubular joints, when the fatigue crack depth is less than 20% of chord wall thickness, the crack growing process is highly affected by weld geometry. Hence, T-butt solution and weld magnification factor (Mk) are applicable tools for evaluating the crack growth rate in this domain. In this research, the capability of Artificial Neural Network (ANN) for estimating the Mk of weld toe c...
متن کاملEvaluating Weld Magnification Factor in Welded Tubular Joints Using Artifitial Neural Networks
In welded tubular joints, when the fatigue crack depth is less than 20% of chord wall thickness, the crack growing process is highly affected by weld geometry.
 Hence, T-butt solution and weld magnification factor (Mk) are applicable tools for evaluating the crack growth rate in this domain. In this research, the capability of Artificial Neural Network (ANN) for estimating the Mk of weld toe...
متن کاملRejection of the Feed-Flow Disturbances in a Multi-Component Distillation Column Using a Multiple Neural Network Model-Predictive Controller
This article deals with the issues associated with developing a new design methodology for the nonlinear model-predictive control (MPC) of a chemical plant. A combination of multiple neural networks is selected and used to model a nonlinear multi-input multi-output (MIMO) process with time delays. An optimization procedure for a neural MPC algorithm based on this model is then developed. T...
متن کامل