A Novel Smart Resistive - Capacitive Position Sensor

نویسنده

  • Xiujun Li
چکیده

A novel smart resistive-capacitive angular position sensor is presented. The main advantages of this low-cost system are its simplicity, high stability and high reliability. A very hear oscillator is used in the processing circuit to convert the position quantity to a period-modulated signal which can directly be read out by a microcontroller. The system does not need an A/D converter. The nonlinearity of the smart angular position sensor system is less than f03% (f0.9”) over the range of 270”.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Novel Resistive Capacitive Feedback Trans-impedance Amplifier Optimization Using IPSO Algorithm

A novel low noise trans-impedance amplifier is proposed using low cost 0.18 µm CMOS technology. A resistive-capacitive feedback is used to extend the bandwidth of the amplifier. As the structure is inductor less, it is suitable for low cost integrated optical interconnects. In this paper Improved Particle Swarm Optimization have applied to determine optimal trans-resistance and noise of propose...

متن کامل

The Use of PE/PVDF Pressure and Temperature Sensors in Smart Wireless Sensor Network System Developed for Environmental Monitoring

In this work, a design of wireless system for multi-sensors monitoring has been presented. The main purpose of this research is to develop an efficient telemetry system for measuring water pressure and temperature signals. The system reads data from two types of sensors, temperature (resistive) and pressure (capacitive). Anderson circuit configuration has been used for the resistive sensor, sin...

متن کامل

Design of Novel High Sensitive MEMS Capacitive Fingerprint Sensor

In this paper a new design of MEMS capacitive fingerprint sensors is presented. The capacitive sensor is made of two parallel plates with air gap. In these sensors, the capacitance changes is very important factor. It is caused by deformation of the upper electrode of sensor. In this study with making slots in upper electrode, using T-shaped protrusion on diaphragm in order to concentrate the f...

متن کامل

Design of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane

This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...

متن کامل

A new 0.35 μm CMOS electronic interface for wide range floating capacitive and grounded/floating resistive sensor applications

In this paper we propose a novel interface circuit suitable for the read-out of both wide range floating capacitive and grounded/floating resistive sensors. This solution, employing only two Operational Amplifiers (OAs) as active blocks and some passive components, is based on a square-wave oscillating circuit topology which, instead of a voltage integration typically performed by other solutio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004