Experimental analysis of coagulation of particles under low-shear flow.

نویسندگان

  • Jordi Colomer
  • Francesc Peters
  • Cèlia Marrasé
چکیده

The aggregation and breakup of particle flocs were investigated by monitoring the size distribution of a suspension of aggregates, with diameter d(o), under shear flow created by two mixing systems. The aggregation behavior was studied in 63 experiments under various conditions of induced shear rate and particle volume concentration for particle aggregates smaller than the Kolmogorov scale. Despite small shear rates being characteristics of natural systems, only experiments with comparatively high shear rates have been conducted to date. Because of this reason, in this study, the shear rates were chosen to mimic those found in natural systems. In the first set of experiments the aggregate size, d, was analyzed by changing the mean shear, G (ranging from 0.70 to 27.36 s(-1)) created in a tank with a grid oscillating through the whole suspension volume. In the second set of experiments, a spherical flask was placed in an orbital shaking table where G ranged from 0.45 to 2.40s(-1). In all the cases there was an increase of d at increasing G . The dependence on d was found to be identical for the particle volume concentrations investigated, phi=0.2,0.8,2,4,6,8 and 10 x 10(-5), with the stable aggregate size shifting towards aggregate growth as particle volume concentration increased. These results demonstrate that shear provided a means to keep the particle number count high for collisions to occur but it is small enough that the aggregation-breakup balance is dominated by aggregation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Investigation of the Permeability and Inertial Effect on Fluid Flow through Homogeneous Porous Media

The value of the permeability in fluid flow through porous media is important for process investigation. In low Reynolds number, the classic Darcy’s law is suitable for simulation of fluid flow. In this paper, an experimental study for evaluation of preformed fiber permeability has been done. Also, the deviations from the classical Darcy law by experimental and numerical simulation of the N...

متن کامل

Shear- and magnetic-field-induced ordering in magnetic nanoparticle dispersion from small-angle neutron scattering.

Small-angle neutron scattering experiments have been performed to investigate orientational ordering of a dispersion of rod-shaped ferromagnetic nanoparticles under the influence of shear flow and static magnetic field. In this experiment, the flow and flow gradient directions are perpendicular to the direction of the applied magnetic field. The scattering intensity is isotropic in zero-shear-r...

متن کامل

Mathematical modeling of blood flow in a stenosed artery under MHD effect through porous medium

In this investigation, a mathematical model for studying oscillatory flow of blood in a stenosed artery under the influence of transverse magnetic field through porous medium has been developed. The equations of motion of blood flow are solved analytically. The analytical expressions for axial velocity, volumetric flow rate, pressure gradient, resistance to blood flow and shear stress have been...

متن کامل

An Enhanced Viscoplastic Constitutive Model for Semi-Solid Materials to Analyze Shear Localization

Semi-solid materials undergo strain localization and shear band formation as a result of granular nature of semi-solid deformation. In the present study, to analyze the shear localization, a unified viscoplastic constitutive model was developed for the homogeneous flow. Then, a linearized analysis of the stability performed by examining the necessary condition for the perturbation growth. For t...

متن کامل

Experimental and Numerical Study of Perforated Steel Plate Shear Panels

Thin perforated Steel Plate Shear (SPS) Walls are among the most common types of energy dissipating systems. The applied holes reduce the shear strength of the plate and allow to decrease the profile size of the members at the boundary of the panel when these systems are used in the typical design of structures. On the other hand, the different fracture locations of these panels are visible whe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Water research

دوره 39 13  شماره 

صفحات  -

تاریخ انتشار 2005