Experimental Modeling, Repeatability Investigation and Optimization of Microwave Bond Wire Interconnects
نویسندگان
چکیده
We present the first comprehensive experimental characterization of bond wire interconnects at microwave frequencies which includes a repeatability study, modeling and optimization. Wire bond interconnects with two different bond types (ball-crescent and wedge), two different loop types (tight and loose) and two different lengths (15 and 25 mils), were fabricated and experimentally investigated. We report the performance and repeatability comparison of these configurations and develop an electromagnetic as well as a simple wide band lumped-element equivalent circuit model to 40 GHz. A novel ribbon bond interconnect topology has also been proposed and experimentally tested demonstrating 65% less reflection compared to the conventional bond wire or ribbon configuration.
منابع مشابه
An investigation on the adhesion of two endodontic sealers AH 26, Dorifill) to dentin (
An investigation on the adhesion of two endodontic sealers AH 26, Dorifill) to dentin ( * - Dr. S. Khedmat** Dr. M. Khorramdoost*- Assistant professor of Endodontics Dept. Faculty of Dentistry Tehran University of Medical Sciences. ** - Dentist. Background and aim: Tensile bond strength of endodontic sealers to dentin is an indicative of sealer's adhesion to dentin. Due to the fact that Gutta...
متن کاملModeling and Layout Optimization of VLSI Devices and Interconnects In Deep Submicron Design
This paper presents an overview of recent advances on modeling and layout optimization of devices and interconnects for high-performance VLSI circuit design under the deep submicron technology. First, we review a number of interconnect and driver/gate delay models, which are most useful to guide the layout optimization. Then, we summarize the available performance optimization techniques for VL...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملModeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm
This paper deals with modeling and optimization of the roll-bonding process of Ti/Cu/Ti composite for determination of the best roll-bonding parameters leading to the maximum Ti/Cu bond strength by combination of neural network and genetic algorithm. An artificial neural network (ANN) program has been proposed to determine the effect of practical parameters, i.e., rolling temperature, reduction...
متن کاملAn experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach
In the present work, an experimental investigation on wire electrical discharge machining (WEDM) of Monel-400 has been presented. Monel-400 is a nickel–copper-based alloy, mostly employed in ships and corrosion-resisting applications. Four input WEDM parameters namely discharge current (Ip), pulse-on time (Ton), pulse-off time (Toff) and servo voltage (SV) have been investigated and modeled for...
متن کامل