Bio-inspired silicification on patterned surfaces generated by microcontact printing and layer-by-layer self-assembly.
نویسندگان
چکیده
Micropatterns of silica were generated under biocompatible conditions by a combination of microcontact printing (muCP), layer-by-layer (LbL) self-assembly, and biomimetic silicification. Quaternary amine-containing poly(diallyl dimethyl ammonium chloride) induced polycondensation of silicic acid, resulting in spatioselective formation of silica micropatterns. Scale bar: 10 microm.
منابع مشابه
Selective atomic layer deposition of titanium oxide on patterned self-assembled monolayers formed by microcontact printing.
We demonstrate a selective atomic layer deposition of TiO2 thin films on patterned alkylsiloxane self-assembled monolayers. Microcontact printing was done to prepare patterned monolayers of the alkylsiloxane on Si substrates. The patterned monolayers define and direct the selective deposition of the TiO2 thin film using atomic layer deposition. The selective atomic layer deposition is based on ...
متن کاملIntact transfer of layered, bionanocomposite arrays by microcontact printing.
A novel approach is presented that allows high-quality, 3D patterned bionanocomposite layered films to be constructed on substrates whose surface properties are incompatible with existing self-assembly methods.
متن کاملMicrofabrication through Electrostatic Self-Assembly
We use electrostatic interactions to direct the patterning of gold disks having ∼10-μm diameters on functionalized surfaces. Planar and curved substrates with patterned surface charge were generated either by microcontact printing or by photolithography. Small charged gold disks were generated by electroplating gold into photoresist molds and derivatizing these disks with charged self-assembled...
متن کاملMicrofabrication of two layer structures of electrically isolated wires using self-assembly to guide the deposition of insulating organic polymer
The fabrication of two layer structures of electrically isolated wire — crossed wire structures and a surface coil inductor — is described. The fabrication process utilizes the tools of soft lithography and incorporates two levels of self-assembly. The use of microcontact printing and patterned self-assembly of liquid polymers removes the need for registration of the insulating layer with the u...
متن کاملPatterning small-molecule biocapture surfaces: microcontact insertion printing vs. photolithography.
Chemical patterns prepared by self-assembly, combined with soft lithography or photolithography, are directly compared. Pattern fidelity can be controlled in both cases but patterning at the low densities necessary for small-molecule probe capture of large biomolecule targets is better accomplished using microcontact insertion printing (μCIP). Surfaces patterned by μCIP are used to capture biom...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemistry, an Asian journal
دوره 4 3 شماره
صفحات -
تاریخ انتشار 2009