Measuring the flowing properties of powders and grains
نویسندگان
چکیده
Article history: Received 7 February 2011 Received in revised form 23 September 2011 Accepted 11 February 2012 Available online 19 February 2012
منابع مشابه
Effect of milling time and microwave sintering on microhardness and electrical properties of nano and micro structured cordierite
The purpose of this research is to investigate the mechanical and electrical properties of nano structured cordierite. Nano grain size powders were synthesized through mechanical activation by high-energy ball milling of the starting powders containing 34.86 wt% Al2O3, 51.36 wt% SiO2, and 13.78 wt% MgO. Samples were prepared by conventional and microwave sintering at 1390°C. SEM observations il...
متن کاملStudy on the strengthening mechanisms and failure modes of the ultra-fine grained tri-modal Al5083-5wt. %B4C-Al2024 and Al5083-5 wt. %B4C-Al5083 composites
In this paper, the influence of Al2024 and Al5083 aluminum alloy coarse grains on mechanical properties and fracture mechanism of Al5083-B4C tri-modal composite has been discussed. Al5083 alloy powders with 5 wt. % of boron carbide were milled for 36 hours and 25 and 50 wt. % of coarse grain (CG) Al2024 and Al5083 powders were added to the milled powders and then hot press under argon atmospher...
متن کاملComparison of the effect of chromium oxide and magnesium oxide on the mechanical properties and microstructure of alumina-mullite-zirconia composites
Alumina-mullite-zirconia composites were prepared by the reaction sintering method between alumina and zircon powders and the effect of two additives (chromium oxide and manganese oxide)were investigated on their properties. 2 and 4 wt% of each oxide were added to the raw material composition and after pressing, the samples were sintered at 1630°C. The results showed that chromium oxide decreas...
متن کاملآستانهی ابعادی تشکیل نواحی دوقلویی در میکرونانو ذرات نمونه ابررسانای YBa2Cu3O7-x
Twinning is one of the main mechanisms of plastic deformation in crystals and its effect on the empirical properties has been important in materials science. Twin boundaries have been proved to be effective flux pinning centers in YBCO that increasing the critical current density. High-temperature superconductor YBa2Cu3O7-x (YBCO) nanoparticles were prepared by solid state alloying method. The ...
متن کاملThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing
In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...
متن کامل