A new optimal approach for improvement of active power filter using FPSO for enhancing power quality
نویسندگان
چکیده
In the recent years, development of industry cause to increase nonlinear and time variant loads in power systems. These loads bring about power quality phenomena such as voltage and current harmonics, current unbalance and flicker in power systems. In this paper, an optimal method for active power filter is proposed to improve power quality. The control system of APF is based on combination of the synchronous detection method, instantaneous power theory, and output of DC capacitor voltage regulator. To stabilize the DC voltage and improvement of reference currents, PID controller is suggested. Regarding to intense changes of load in power system due to nonlinear load, PID controller with fixed parameters could not adequate for the APF control. Therefore, Fuzzy Particle Swarm Optimization method is proposed for optimizing of PID controller. This method is found on PSO and Fuzzy algorithm. To evaluate the proposed method, the APF is modeled in the worst conditions with a power system loaded with two electric arc furnace. In addition, in order to make good use of frequency changes in the power system, the power frequency estimation is put to use. 2015 Elsevier Ltd. All rights reserved.
منابع مشابه
Improving the performance of UPQC under unbalanced and distortional load conditions: A new control method
This paper presents a new control method for a three-phase four-wire Unified Power Quality Conditioner (UPQC) to deal with the problems of power quality under distortional and unbalanced load conditions. The proposed control approach is the combination of instantaneous power theory and Synchronous Reference Frame (SRF) theory which is optimized by using a self-tuning filter (STF) and without us...
متن کاملA Novel Reference Current Calculation Method for Shunt Active Power Filters using a Recursive Algebraic Approach
This paper presents a novel method to calculate the reference source current and the referencecompensating current for shunt active power filters (SAPFs). This method first calculates theamplitude and phase of the fundamental load current from a recursive algebraic approach blockbefore calculating the displacement power factor. Next, the amplitude of the reference mains currentis computed with ...
متن کاملDesing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions
In recent years, active filters have been considered and developed for elimation of harmonics in power networks. Comparing with passive, they are smaller and have better compensating characteristics and resistance to line distortions. In this paper, a novel idea based on adaptive filter theory in presented to develop an active filter to eliminate the distortions of an arbitrary signal. Using th...
متن کاملDesing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions
In recent years, active filters have been considered and developed for elimation of harmonics in power networks. Comparing with passive, they are smaller and have better compensating characteristics and resistance to line distortions. In this paper, a novel idea based on adaptive filter theory in presented to develop an active filter to eliminate the distortions of an arbitrary signal. Using th...
متن کاملDesign and Control of a Novel hybrid Active Power Filter based on Load Harmonic Currents Separation with the aim of DC-link voltage minimization in voltage source converter
This paper proposes a new hybrid active power filter, including voltage source converter (VSC) based active power filter and Thyristor Controllable LC Passive Filter (TCLC-HAPF) for eliminating harmonic load current components and compensating reactive power. This new structure which is based on the separation of high and low-frequency components of load current idea can reduce the drawbacks of...
متن کامل