^ANALYTICAL FORMULATION OF DAMPED STRESS-STRAIN js.1 RELATIONS BASED ON EXPERIMENTAL DATA WITH Q} APPLICATIONS TO VIBRATING STRUCTURES
ثبت نشده
چکیده
A technique is presented for the constructions of stressstrain relations based on experimental, cyclic, damping data. The extension of this technique to the biaxial stress case is then shown followed by an example application involving flexural vibrations of a cantilever.
منابع مشابه
Third Order Formulation for Vibrating Non-Homogeneous Cylindrical Shells in Elastic Medium
Third order shear deformation theory of cylindrical shells is employed to investigate the vibration characteristics of non-homogeneous cylindrical shells surrounded by an elastic medium. The kinematic relations are obtained using the strain-displacement relations of Donnell shell theory. The shell properties are considered to be dependent on both position and thermal environment. A suitable fun...
متن کاملEquilibrium condition nonlinear modeling of a cracked concrete beam using a 2D Galerkin finite volume solver
A constitutive model based on two–dimensional unstructured Galerkin finite volume method (GFVM) is introduced and applied for analyzing nonlinear behavior of cracked concrete structures in equilibrium condition. The developed iterative solver treats concrete as an orthotropic nonlinear material and considers the softening and hardening behavior of concrete under compression and tension by using...
متن کاملAssessing different nonlinear analysis methods for free vibrations of initially stressed composite laminated plates
In this paper, the nonlinear free vibrations of thin symmetric and non-symmetric cross-ply composite plates subjected to biaxial initial stresses are investigated. Because of their excellent properties such as specific strength and specific stiffness, composite plates have wide applications in aerospace and mechanical structures. Based on Von-Karman's strain-displacement relations and using Gal...
متن کاملAn Experimental and Analytical Study on Alccofine Based High Strength Concrete
The use of supplementary cementitious materials (SCMs) in concrete manufacturing is considered as financial, technical and environmental benefit. In this regard, this paper presents the experimental and analytical study of high strength concrete (HSC) with alccofine-1203 (alccofine) and fly ash as partial replacements to cement. A total of seven mixes were prepared with different percentages of...
متن کاملEngineering Critical Assessments of Marine Pipelines with 3D Surface Cracks Considering Weld Mismatch
Offshore pipelines are usually constructed by the use of girth welds, while welds may naturally contain flaws. Currently, fracture assessment procedures such as BS 7910 are based on the stress-based methods and their responses for situations with large plastic strain is suspicious. DNV-OS-F101 with limited modifications proposes a strain-based procedure for such plastic loads. In this paper 3D ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012