Improvement of output coupling efficiency of organic light-emitting diodes by backside substrate modification

نویسندگان

  • C. F. Madigan
  • J. C. Sturm
چکیده

The emission intensity of an organic light-emitting diode at normal viewing angle and the total external emission efficiency have been increased by factors of 9.6 and 3.0, respectively, by applying spherically shaped patterns to the back of the device substrate. The technique captures light previously lost to waveguiding in the substrate and, with proper choice of substrate, light previously lost to waveguiding in the organic/anode layers. A method of applying the technique using laminated films and an optical model for evaluating coupling efficiency are also presented. © 2000 American Institute of Physics. @S0003-6951~00!01613-2#

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Light-Output Enhancement of GaN-Based Light-Emitting Diodes with Three-Dimensional Backside Reflectors Patterned by Microscale Cone Array

Three-dimensional (3D) backside reflector, compared with flat reflectors, can improve the probability of finding the escape cone for reflecting lights and thus enhance the light-extraction efficiency (LEE) for GaN-based light-emitting diode (LED) chips. A triangle-lattice of microscale SiO2 cone array followed by a 16-pair Ti3O5/SiO2 distributed Bragg reflector (16-DBR) was proposed to be attac...

متن کامل

Thin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS

In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...

متن کامل

11.4: Coupling Efficiency Enhancement of Organic Light Emitting Devices with Refractive Microlens Array on High Index Glass Substrate

An approach to increase the coupling efficiency of organic light emitting diodes (OLEDs) is studied. Refractive microlens arrays are formed on the high refractive index glass substrate by etching the glass using reflowed photoresist as mask. Over 65% more light is extracted from the OLED on the microlens array substrate as compared with the conventional device, without affecting the electrical ...

متن کامل

Enhancement of InGaN-Based Light Emitting Diodes Performance Grown on Cone-Shaped Pattern Sapphire Substrates

To enhance light extraction effciency, high-quality InGaN-based light emitting diodes (LED) was grown on cone-shaped patterned sapphire (CPSS) by using metal organic chemical vapor deposition (MOCVD). From the transmission electron microscopy (TEM) observation, the CPSS was confirmed to be an efficient way to reduce the threading dislocation density in the GaN epilayer. A sharp and high intensi...

متن کامل

30-mW-Class High-Power and High-Efficiency Blue Semipolar (10 1 1) InGaN/GaN Light-Emitting Diodes Obtained by Backside Roughening Technique

The first 30-mW-class semipolar blue light-emitting diode (LED) on a free-standing (10 1 1) GaN substrate has been demonstrated by using microscale periodic backside structures. The light extraction efficiency and corresponding output power were greatly enhanced, by up to 2.8-fold (bare chip) compare with conventional devices. At a driving current of 20mA, the LED showed an output power of 31.1...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000