Subproblem h-Conform Formulation for Accurate Thin Shell Models Between Conducting and Nonconducting Regions
نویسندگان
چکیده
Models Between Conducting and Nonconducting Regions Vuong Q. Dang, Patrick Dular, Ruth V. Sabariego, Laurent Krähenbühl, and Christophe Geuzaine 1 University of Liège, Dept. of Electrical Engineering and Computer Science, ACE, B-4000 Liège, Belgium 2 Fonds de la Recherche Scientifique F.R.S.-FNRS, Belgium 3 Université de Lyon, Ampère (CNRS UMR5005), École Centrale de Lyon, F-69134 Écully, France e-mail: [email protected]
منابع مشابه
Subproblem h-Conform Magnetodynamic Finite Element Formulation for Accurate Model of Multiply Connected Thin Regions
Abstract. A subproblem h-conform eddy current finite element method is proposed for correcting the inaccuracies inherent to thin shell models. Such models replace volume thin regions by surfaces but neglect border e↵ects in the vicinity of their edges and corners. The developed surface-to-volume correction problem is defined as a step of the multiple subproblems applied to a complete problem, c...
متن کاملSubproblem Method with Dual Finite Element Formulations for Accurate Thin Shell Models
A subproblem method with dual finite element magnetostatic and magnetodynamic formulations is developed to correct the inaccuracies near edges and corners coming from thin shell models, that replace thin volume regions by surfaces. The surface-to-volume correction problem is defined as one of the multiple subproblems applied to a complete problem, considering successive additions of inductors a...
متن کاملEvaluation of Eddy Losses Due to High Current Leads in Transformers Using a Subproblem Method
A subproblem finite element method is developed for evaluating the eddy losses due to high current leads in transformers. The structural component of the transformer is modeled with classical volumetric elements or more efficiently with a thin shell model (surface impedance technique). Tools are then developed to correct the inaccuracies near edges and corners inherent to thin shell models for ...
متن کاملAccurate Analysis of Dielectric Backed Planar Conducting Layers of Arbitrarily Shaped in a Rectangular Waveguide
The characteristics of dielectric backed planar conducting layers of arbitrarily shaped in a rectangular waveguide are calculated by means of coupled integral equation technique (CIET) which accurately takes higher order mode interactions. Equivalent structures for the accurate analysis whole structure are introduced in which magnetic surface currents are identified as the unknowns at the apert...
متن کاملValidation of Shell Theory for Modeling the Radial Breathing Mode of a Single-Walled Carbon Nanotube (RESEARCH NOTE)
In this paper, the radial breathing mode (RBM) frequency of single-walled carbon nanotube (SWCNT) is studied based on the thin shell theory. For this purpose, SWCNT is considered as an elastic thin cylindrical shell. The dynamic equation of RBM is derived using the Hamilton’s principle. An analytical solution of the RBM frequency of SWCNT is obtained. The advantage of this formulation is that i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012