Molecular H2O as carrier for oxygen diffusion in hydrous silicate melts

نویسندگان

  • H. Behrens
  • Y. Zhang
  • M. Leschik
  • M. Wiedenbeck
  • G. Heide
  • G. H. Frischat
چکیده

Dissolved water is known to dramatically enhance oxygen diffusion in silicate melts, glasses and minerals. A quantitative theory has been developed to explain this phenomenon by transport via molecular H2O diffusion [Y. Zhang, E.M. Stolper, G.J. Wasserburg, Diffusion of a multi-species component and its role in the diffusion of water and oxygen in silicates, Earth Planet. Sci. Lett., 103 (1991) 228–240.]. Here we report experimental confirmation of the theory for rhyolitic melts by measuring both H2O and O diffusion profiles in a single experiment. In sorption experiments at 100 MPa and temperatures from 1041 to 1136 K isotopically enriched water diffused into doubly polished rhyolitic glass wafers. H2O profiles were analyzed by infrared spectroscopy and O profiles by SIMS. O diffusivities were found to be 1–2 orders of magnitude slower than bulk water diffusivities but 3–4 orders of magnitude faster than Eyring diffusivities calculated from viscosity. The data show that oxygen “self” diffusion under hydrothermal conditions is due to molecular H2O diffusion, not due to the self diffusion of oxygen itself. With this confirmation, experimental data on H2O diffusion in silicate melts can be used to infer O diffusion under hydrothermal conditions, and hydrothermal oxygen diffusion data in silicate minerals can be used to infer H2O diffusivity, as long as the concentration or solubility of H2O in the given phase is known. © 2006 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Silicate Melt Properties and Volcanic Eruptions

[1] Knowledge about the properties of silicate melts is needed by volcanologists and petrologists to evaluate the dynamics of volcanic eruptions and magmatic processes. These properties include the solubility and diffusivity of volatile components in silicate melts, silicate melt viscosity, and the fragmentation condition. Data and models of each property are reviewed and assessed. For rhyoliti...

متن کامل

Effect of H2O on the density of silicate melts at high pressures: Static experiments and the application of a modified hard-sphere model of equation of state

Density of ultramafic silicate melts was determined using the sink/float technique at high pressures. Seven melt compositions were studied, among which three were dry compositions with different Mg#’s (molar MgO/(MgO + FeO) 100) and the other four were hydrous compositions synthesized by adding 2–7 wt.% H2O to the anhydrous ones. Experimental conditions range from 9 to 15 GPa and from 2173 to 2...

متن کامل

Water-melt interaction in hydrous magmatic systems at high temperature and pressure

Experimental data on the structure and properties of melts and fluids relevant to water-melt interaction in hydrous magmatic systems in the Earth's interior have been reviewed. Complex relationships between water solubility in melts and their bulk composition [Al/Si-ratio, metal oxide/(Al + Si) and electron properties of metal cations] explain why water solubility in felsic magmas such as those...

متن کامل

Compressibility of water in magma and the prediction of density crossovers in mantle differentiation.

Hydrous silicate melts appear to have greater compressibility relative to anhydrous melts of the same composition at low pressures (<2GPa); however, at higher pressures, this difference is greatly reduced and becomes very small at pressures above 5GPa. This implies that the pressure effect on the partial molar volume of water in silicate melt ( partial differentialV-H2O/ partial differentialP) ...

متن کامل

Mineral / melt partitioning of trace elements during hydrous peridotite partial melting

This experimental study examines the mineral/ melt partitioning of incompatible trace elements among high-Ca clinopyroxene, garnet, and hydrous silicate melt at upper mantle pressure and temperature conditions. Experiments were performed at pressures of 1.2 and 1.6 GPa and temperatures of 1,185 to 1,370 C. Experimentally produced silicate melts contain up to 6.3 wt% dissolved H2O, and are satur...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007