Using 31-Bit Prefixes on IPv4 Point-to-Point Links
نویسندگان
چکیده
With ever-increasing pressure to conserve IP address space on the Internet, it makes sense to consider where relatively minor changes can be made to fielded practice to improve numbering efficiency. One such change, proposed by this document, is to halve the amount of address space assigned to point-to-point links (common throughout the Internet infrastructure) by allowing the use of 31-bit subnet masks in a very limited way.
منابع مشابه
Using 127-Bit IPv6 Prefixes on Inter-Router Links
On inter-router point-to-point links, it is useful, for security and other reasons, to use 127-bit IPv6 prefixes. Such a practice parallels the use of 31-bit prefixes in IPv4. This document specifies the motivation for, and usages of, 127-bit IPv6 prefix lengths on inter-router point-to-point links. Information about the current status of this document, any errata, and how to provide feedback o...
متن کاملEngineering Task Force ( IETF ) M . Kohno
On inter-router point-to-point links, it is useful, for security and other reasons, to use 127-bit IPv6 prefixes. Such a practice parallels the use of 31-bit prefixes in IPv4. This document specifies the motivation for, and usages of, 127-bit IPv6 prefix lengths on inter-router point-to-point links. Information about the current status of this document, any errata, and how to provide feedback o...
متن کاملFast binary and multiway prefix searches for packet forwarding
Backbone routers with tens-of-gigabits-per-second links are indispensable communication devices to deploy on the Internet. The IP lookup operation is the most critical task that must be improved in routers. In this paper, we first present a systematic method to compare prefixes of different lengths. The list of prefixes can then be sorted and stored in a sequential array, which is contrary to t...
متن کاملPredicting Force in Single Point Incremental Forming by Using Artificial Neural Network
In this study, an artificial neural network was used to predict the minimum force required to single point incremental forming (SPIF) of thin sheets of Aluminium AA3003-O and calamine brass Cu67Zn33 alloy. Accordingly, the parameters for processing, i.e., step depth, the feed rate of the tool, spindle speed, wall angle, thickness of metal sheets and type of material were selected as input and t...
متن کاملDiscovery of IPv6 router interface addresses via heuristic methods
With the assignment of the last available blocks of public IPv4 addresses from Internet Assigned Numbers Authority, there is continued pressure for widespread IPv6 adoption. Because the IPv6 address space is orders of magnitude larger than the IPv4 address space, researchers need new methods and techniques to accurately measure and characterize growth in IPv6. This thesis focuses on IPv6 router...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- RFC
دوره 3021 شماره
صفحات -
تاریخ انتشار 2000