Analyzing the Cooling Efficiency of the Thermal Environment in Data Centers

نویسندگان

  • Yongmei Xu
  • Jingru Zhang
  • Yuhui Deng
  • Lan Du
  • Rong Jiao
چکیده

Given the explosive growth of data, scalability and fault tolerance have become a fundamental challenge for data center network structures. Temperature in data centers significantly affects the failure ratio of high-speed network devices. Various types of air distribution schemes influence the temperature of network equipment differently, and the cooling cost in data centers dominates the overall energy cost. On the basis of the energy efficiency of cooling systems, this study analyzes and compares the thermal load distribution in the enclosure of standard and non-standard data centers by considering the effects of the external environment. Analysis results demonstrate that the external environment significantly affects the thermal load of non-standard data centers. By leveraging on the air temperature outside data centers and on the inlet/outlet of IT equipment, the air temperature and return air temperature of air conditioning are calculated when performing hot and cold aisle containment. The calculations indicate that sealing an appropriate aisle (hot or cold aisle) can significantly reduce the energy consumption of cooling systems in terms of the external air temperature outside data centers. Furthermore, if the air temperature outside data centers is higher than the temperature at the inlet of IT equipment, sealing the cold aisle outperforms sealing the hot aisle. By contrast, the aisle to be sealed depends on the energy efficiency ratio of the air conditioning. Analyzing the Cooling Efficiency of the Thermal Environment in Data Centers

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE)

Wind affects adversely the cooling tower thermal performance. A field investigation was carried out to study the thermal performance of Heller cooling towers under wind conditions, involving measurement of wind velocity and its direction around the cooling tower, and obtaining water flow rates and temperatures at the cooling tower inlet and outlet. Results show that air suction at the tower top...

متن کامل

Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer

Confined aquifers are formations surrounded by impermeable layers called cap rocks and bed rocks. These aquifers are suitable for the seasonal storage of thermal energy. A confined aquifer was designed to meet the cooling and heating energy needs of a residential building complex located in Tehran, Iran. The annual cooling and heating energy needs of the buildings were estimated to be 8.7...

متن کامل

Compare three different algorithms (MOPSO, SPEA2, NSGA-II) for Multi Objective Optimization of a novel Combined Cooling, Heating, and Power (CCHP) system based on organic Rankine cycle

Recently Debates about Energy and the issue of global warming have led to the use of new energy. One of the best options for this purpose is the use of a new hybrid system of power, heating and refrigeration, with its thermal source of solar and geothermal energy. In the present study, used a combined cooling, heating and power system based on the organic Rankine cycle and the Ejector Refrigera...

متن کامل

A systematic approach for a better thermal management of photovoltaic systems- A review

Solar energy is the highly recognized energy source, capable of fulfilling the world’s future energy demands. The solar photovoltaic technology involves the unmediated transformation of sunlight into electricity. A little fraction is converted into electricity and the remaining gets exhausted as unused heat. This results in an increase in the operating temperature of the PV Panel. The conversio...

متن کامل

A Comprehensive Approach to an Optimum Design and Simulation Model of a Mechanical Draft Wet Cooling Tower

The present paper describes the designing of a thermally and economically optimum mechanical draft counter-flow wet cooling tower. The design model allows the use of a variety of packing materials in the cooling tower toward optimizing heat transfer. Once the optimum packing type is chosen, a compact cooling tower with low fan power consumption is modelled within the known design variables....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • IJGHPC

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2014