Application of Electrophoretic Deposition for Interfacial Control of High-Performance SiC Fiber-Reinforced SiC Matrix (SiCf/SiC) Composites
نویسنده
چکیده
This chapter reviews the novel fabrication process of continuous SiCf /SiC composites based on electrophoretic deposition (EPD). EPD process is very effective for achieving relatively homogeneous carbon coating with the thickness of several tens to hundreds nanometers on SiC fibers. Carbon interface with the thickness of at least 100 nm formed by EPD acts effectively for inducing interfacial debonding and fiber pullout during fracture, and the SiCf /SiC composites show excellent mechanical properties. From these results, it is demonstrated that the fabrication process based on EPD method is expected to be an effective way to control the interfaces of SiCf /SiC composites and to obtain high-performance SiCf /SiC composites.
منابع مشابه
Non - destructive inspection of SiCf / SiC composites structure
Fiber reinforced ceramic matrix composite is an attractive candidate as a structural material for future fusion power plants because of their light weight, high temperature capability, high strength and toughness. Ceramic matrix composite made of silicon carbide matrix and fibers (SiCf/SiC) is promising for nuclear and fusion technology due to its excellent radiation resistance, especially expo...
متن کاملMicrostructure of 3d Textile C/pyc/sic Composites Prepared by Chemical Vapor Infiltration
Ceramic matrix composites (CMCs) is one of the most promising candidates for high temperature structural material, in which SiC matrix exhibits an excellent oxidation resistance because of the formation of a protective layer of silica which limits further oxidation [1]. CMCs with continuous fibers exhibit attractive properties such as low densities, high elastic moduli, and high strengths at el...
متن کاملAdvanced Radiation-Resistant Ceramic Composites
Ceramic matrix composites (CMC’s), particularly silicon carbide (SiC) fiber-reinforced SiC-matrix (SiC/SiC) composites, have been studied for advanced nuclear energy applications for more than a decade. The perceived potentials for advanced SiC/SiC composites include the ability to operate at temperature regimes much higher than heat-resistant alloys, the inherent low inducedactivation nuclear ...
متن کاملبررسی تأثیر فرآیند اکستروژن بر ریزساختار و استحکام کامپوزیت Al6061-SiC
Al-SiC composites are among the most demanding metal matrix composites due to their excellent strength, good ductility, good corrosion resistance, low coefficient of thermal expansion and reasonable price. Manufacturing of cast metal matrix composites usually involves some problems such as inhomogeneous distribution of the particles due to poor wetability of ceramics to molten alloys, porosity ...
متن کاملStudy of the Enhanced Precipitation of an Aluminium 6061 Alloy Reinforced by SiC Particles in the Range of β\" Phase Temperature (RESEARCH NOTE)
An experimental method to follow the evolution of the precipitation phenomena in the metal-matrix composites using the thermoelectric power measurements is described. It is shown that one can follow the kinetics of the precipitation during aging. The influence of the reinforcement on the precipitation kinetics is studied in case of an aluminum 6061- SiC, composite (where SiC, represents SiC par...
متن کامل