Light scattering and gloss of an experimental quartz-filled composite.

نویسندگان

  • P M Campbell
  • W M Johnston
  • W J O'Brien
چکیده

For samples of polymethylmethacrylate with and without quartz filler, the inverse of the contrast-gloss ratio is shown to be related to surface roughness and to the optical scattering coefficient. This finding adds to the importance of optical scattering, which has been widely studied because of its relation to color and translucency of materials. Furthermore, optical scattering by composite fillers is shown to be linearly related to the concentration of the filler material within the range of concentrations studied. Quartz fillers were incorporated at concentrations from 5 to 20 weight percent and were short fibers or granular powder, with the granular particles ranging in median equivalent spherical diameter from 15 to 3.3 micron. The efficiency of optical scattering for the granular quartz filler increased as the size of the filler decreased.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

اثر جهت نوردهی بر ریزنشت دو نوع کامپازیت مایکروفیلد و هایبرید

Introduction: One of the most important factors affecting the marginal seal of composite restorations is polymerization shrinkage. The aim of this study was to evaluate the micro leakage of two resin composites cured with two light directions. Methods: In this experimental study, forty similar class III preparations were prepared in 40 human anterior teeth. The teeth were randomly divided in t...

متن کامل

مقایسه میزان میکرو لیکیج در روشهای مختلف ترمیم دندانها با کامپوزیت خلفی

Polymerization contraction may produce defects in the composite - tooth bond. This may lead to bond failure and microleakage. The aim of this study was to reduce microleakage of posterior composites using different methods. 45 molar and premolars extracted teeth were choosen. The cavities were randomly assigned into 5 groups of 9. Box-shaped cavities were prepared on each side of proximal surfa...

متن کامل

Comparative evaluation of the effect of Light Emitting Diode (LED) and Quartz Tungsten Halogen (QTH) light curing units on color stability of Filtek Z350 XT

Introduction:Discoloration of the resin-based composites is a common problem in restorative dentistry. There are many factors associated with the discoloration of dental materials in the oral environment. The purpose of this study was to evaluate the color changes in a nano-composite cured with a quartz-tungsten-halogen (QTH) and light emitting diode (LED) unit. Methods:80 disk-shaped specim...

متن کامل

Surface properties of an indirect composite polymerized with five laboratory light polymerization systems.

A study was conducted to evaluate the influence of laboratory light polymerization systems on the post-curing properties of a composite. An indirect composite (Sinfony) was polymerized with five polymerization systems (Visio system, Hyper LII, Pearlcure Light, Twinkle MIII, and UniXS II) using nine polymerization modes. After light exposure, Knoop hardness number, wear depth, and changes in glo...

متن کامل

The investigation on different light harvesting layers and their sufficient effect on the photovoltaic characteristics in dye sensitized solar cell

Titanium dioxide-based nanofibers (TiO2 nanofiber) were prepared by an electrospinning technique. The electrospun composite fibers were synthesized at different concentrations of titanium isopropoxide (25.35, 50.69, 76.05 wt%) and calcinated at different temperatures (450 oC, 650 oC and 850 oC) for 2 h. The diameters of nanofibers decreased by increas...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of dental research

دوره 65 6  شماره 

صفحات  -

تاریخ انتشار 1986