Comparison between Optimized Passive Vehicle Suspension System and Semi Active Fuzzy Logic Controlled Suspension System Regarding Ride and Handling
نویسندگان
چکیده
The purpose of suspension system in automobiles is to improve the ride comfort and road handling. In this research the ride and handling performance of a specific automobile with passive suspension system is compared to a proposed fuzzy logic semi active suspension system designed for that automobile. The bodysuspension-wheel system is modeled as a two degree of freedom quarter car model. MATLAB/SIMULINK [1] was used for simulation and controller design. The fuzzy logic controller is based on two inputs namely suspension velocity and body velocity. The output of the fuzzy controller is the damping coefficient of the variable damper. The result shows improvement over passive suspension method. Keywords—Suspension System, Ride Comfort, Fuzzy Logic Controller, Passive and Semi Active System.
منابع مشابه
Online Adaptive Neuro - Fuzzy Based Full Car Suspension Control Strategy
Suspension system of a vehicle is used to minimize the effect of different road disturbances for ride comfort and improvement of vehicle control. A passive suspension system responds only to the deflection of the strut. The main objective of this work is to design an efficient active suspension control for a full car model with 8-Degrees Of Freedom (DOF) using adaptive soft-computing technique....
متن کاملPerformance Analysis of a Semiactive Suspension System with Particle Swarm Optimization and Fuzzy Logic Control
This paper uses a quarter model of an automobile having passive and semiactive suspension systems to develop a scheme for an optimal suspension controller. Semi-active suspension is preferred over passive and active suspensions with regard to optimum performance within the constraints of weight and operational cost. A fuzzy logic controller is incorporated into the semi-active suspension system...
متن کاملActive Suspension System Control Using Adaptive Neuro Fuzzy (ANFIS) Controller
The purpose of designing the active suspension systems is providing comfort riding and good handling in different road disturbances. In this paper a novel control method based on adaptive neuro fuzzy system in active suspension system is proposed. Choosing the proper data base to train the ANFIS has an important role in increasing the suspension system’s performance. The data base which is used...
متن کاملAdaptive Fuzzy Wavelet NN Control Strategy for Full Car Suspension System
In the last few years, different linear and non-linear control techniques have been applied by many researchers on the vehicle suspension system. The basic purpose of suspension system is to improve the ride comfort and better road handling capability. Therefore, a comfortable and fully controlled ride can not be guaranteed without a good suspension system. The suspension system can be categori...
متن کاملAutomatization Intelligent Control of Vehicle Magneto-Rheological Semi-Active Suspension
In order to address the problem that traditional passive suspension damping parameter cannot be adjusted which makes it difficult to improve vehicle ride comfort and handling stability, the paper proposes use of controllable magneto-rheological dampers in replace of passive dampers to establish semi-active suspension based on magneto-rheological dampers. By designing magneto-rheological damper ...
متن کامل