Dynamic Calibration of Piezo-two-dimensional Force Sensor
نویسندگان
چکیده
Based on the piezoelectric effect of piezoelectric quartz crystal, a two-dimensional force sensor with good dynamic characteristics is designed, whose sensitive component is single-cut piezoelectric quartz wafers, and it realizes the measurement of force by measuring the charge which is generated by piezoelectric quartz crystal. This paper analyzes measurement principle of the sensor based on the mechanics of materials and gives structure of the sensor. Dynamic calibration system of the sensor is designed, and the curves between sensor output and input are obtained by dynamic calibration experiment and data analysis. This article provides a new way of thinking for in-depth study in dynamic calibration of the sensor and accurate measurement. Copyright © 2013 IFSA.
منابع مشابه
Multifunctional sensor based on organic field-effect transistor and ferroelectric poly(vinylidene fluoride trifluoroethylene)
A multifunctional sensor that responds to all – static/quasi-static or dynamic temperature or force – is reported. The sensor is based on a ferroelectric poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) capacitor connected to the gate of organic field-effect transistor (OFET). Both, the P(VDF-TrFE) capacitance and the output voltage of the P(VDF-TrFE)/OFET sensor exhibit a logarithmic ...
متن کاملStudy on Dynamic Characteristics of Six-axis Wrist Force/torque Sensor
It is necessary to detect complex force and torque components of three-dimensional space in research and manufacture, therefore the multi-axis force and torque sensors are developed rapidly. For examples, the six-axis wrist force/torque sensor for robot assembling and automated polishing [1,2], the multi-component strain gauge balance for wind tunnel testing to determine loads on models [3], th...
متن کاملRobust atomic force microscopy using multiple sensors.
Atomic force microscopy typically relies on high-resolution high-bandwidth cantilever deflection measurements based control for imaging and estimating sample topography and properties. More precisely, in amplitude-modulation atomic force microscopy (AM-AFM), the control effort that regulates deflection amplitude is used as an estimate of sample topography; similarly, contact-mode AFM uses regul...
متن کاملDecoupling Principle Analysis and Development of a Parallel Three-Dimensional Force Sensor
In the development of the multi-dimensional force sensor, dimension coupling is the ubiquitous factor restricting the improvement of the measurement accuracy. To effectively reduce the influence of dimension coupling on the parallel multi-dimensional force sensor, a novel parallel three-dimensional force sensor is proposed using a mechanical decoupling principle, and the influence of the fricti...
متن کاملA Smart 6-dof Load Cell Development
A smart 6-DOF load cell is developed which uses an array of ICP® strain gages with piezo-electric sensing elements. Since the strain gage transducers have multiple-pin connectors, Transducer Electronic Data Sheets (TEDS) can be used to identify each sensing element, thereby simplifying the cabling and eliminating channel identification errors. The TEDS of each strain gage also stores a single w...
متن کامل