Diagnosis for Rotating Shaft Using Adaptive Modal Parameter Identification Method
نویسندگان
چکیده
It's important to understand the dynamic behavior of a structure under operating condition from the view point of vibration shapes of a structure on well excited frequency components and accurate identification of amplitude on each point of a structure. Operating Deflection Shapes (ODSs) can be defined for nonlinear and non stationary structural motion. ODSs provide very useful information for understanding and evaluating the absolute dynamic behavior of a machine, component or an entire structure. In this study. we use adaptive modal parameter Identification method to identify ODSs. The method we use in this study is to perform condition monitoring based on ODSs and diagnosis by changing modal characteristics. We confirm the effectiveness this method by simulation and experiment. It is applied for a rotating machinery with an overhung rotor.
منابع مشابه
Modal analysis of a turbo-pump shaft: An innovative suspending method to improve the results
Modal parameter extraction of high speed shafts is of critical importance in mechanical design of turbo-pumps. Due to the complex geometry and peripheral components of turbo-pumps, difficulties can arise in determination of modal parameters. In this study, modal properties of a turbo-pump shaft, was studied by experimental modal analysis, and using different excitation techniques. An innovative...
متن کاملCrack Identification of a Rotating Shaft with Integrated Wireless Sensor
This paper presents a novel real-time crack identification method to determine the position and depth of a transverse open crack on a rotating shaft. A newly developed wireless sensor capable of being mounted directly on the shaft is employed to monitor acceleration at different points of the shaft in a rotating coordinate system. The vibration parameters obtained from the wireless sensors and ...
متن کاملOnline Crack Detection Method for a Rotating Shaft
This paper presents a novel real-time crack identification method to determine the position and depth of a transverse open crack on a rotating shaft. A newly developed wireless sensor capable of being mounted directly on the shaft can be employed to monitor acceleration at different points of a shaft in a rotating coordinate system. The vibration parameters obtained from a Finite Element Model ...
متن کاملResearch in the Operational Modal Analysis of Rotating Machinery Reducer
In operational modal analysis process of the rotating machinery, it is always difficult to adopt usual modal analysis methods in parameter correction because of the modal parameter identification problems caused by harmonic modes. A technique to distinguish harmonic and structural modes is proposed here, that is, through frequency domain decomposition (FDD) of the vibration signals power spectr...
متن کاملDamage identification of structures using experimental modal analysis and continuous wavelet transform
Abstract: Modal analysis is a powerful technique for understanding the behavior and performance of structures. Modal analysis can be conducted via artificial excitation, e.g. shaker or instrument hammer excitation. Input force and output responses are measured. That is normally referred to as experimental modal analysis (EMA). EMA consists of three steps: data acquisition, system identificatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003