Stochastic Modeling and Uncertainty Cascade of Soil Bearing and Shearing Characteristics for Light-weight Vehicle Applications

This paper investigates the validity of commonly used terramechanics models for light-weight vehicle applications while accounting for experimental variability. This is accomplished by means of cascading uncertainty up to the terminal point of operations measurement. Vehicle-terrain interaction is extremely complex, and thus models and simulation methods for vehicle mobility prediction are largely based on empirical test data. Analytical methods are compared to experimental measurements of key operational parameters such as drawbar force, torque, and sinkage. Models of these operational parameters ultimately depend on a small set of empirically determined soil parameters, each with an inherent uncertainty due to test variability. The soil parameters associated with normal loads are determined by fitting the dimensionless form of Bekker’s equation to the data given by the pressure-sinkage test. In a similar approach, the soil parameters associated with shear loads are determined by fitting Janosi and Hanamoto’s equation to the data given by the direct shear test. An uncertainty model is used to propagate the soil parameter variability through to the wheel performance based on Wong and Reece. The commonly used analytical model is shown to be inaccurate as the envelope of model uncertainty does not lie within the experimental measures, suggesting that model improvements are required to accurately predict the performance of light-weight vehicles on deformable terrain. Disclaimer: Reference herein to any specific commercial company, product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or the Department of the Army (DoA). The opinions of the authors expressed herein do not necessarily state or reflect those of the United States Government or the DoA, and shall not be used for advertising or product endorsement purposes.