N ov 2 00 1 Growth kinetic study of Sputter Deposition : Ag on Si / SiO
نویسندگان
چکیده
We have presented the kinetic study of the very initial growth stages of an ultra thin film (40Å-150Å) of Ag sputter-deposited on Si(001) substrate containing native oxide using grazing incidence x-ray reflectivity (GIXR) technique and Atomic Force Microscopy (AFM). We observe that the film consists of mounds with the presence of voids. The thickness 'd xray ' and the packing fraction 'η' of the film as a function of time 't' follow a simple power law, d xray ∼ t m and η ∼ t n with the exponent m = 0.58 and n = 0.37 respectively. We have quantitatively determined that the voids between the mounds decrease at the initial growth stages with the increase in mound size using GIXR measurement. The mound size increases mainly by the coalescence process on the substrate. We have observed that as a function of time the mound size R(t) increases radially as ∼ t z. The radial growth exponent z crosses over from z > 0.5 to z ∼ 0.25 indicating two growth regimes. The GIXR measurement reveals sublinear dependence of η on d and the AFM measurement shows a cross over of the radial growth exponent, both these indicates that the lateral growth of the mound is enhanced initially reducing the voids.
منابع مشابه
Growth kinetic study of Sputter Deposition : Ag on Si / SiO
We have presented the kinetic study of the very initial growth stages of an ultra thin film (40Å-150Å) of Ag sputter-deposited on Si(001) substrate containing native oxide using grazing incidence x-ray reflectivity (GIXR) technique and Atomic Force Microscopy (AFM). We observe that the film consists of mounds with the presence of voids. The thickness 'd xray ' and the packing fraction 'η' of th...
متن کاملHighly oriented NiFe soft magnetic films on Si substrates
Highly oriented NiFe thin films have been produced via sputter deposition on HF etched Si substrates. Cu and Ag are used as underlayers to induce the epitaxial growth of NiFe films. The orientation relationships between NiFe, Cu, Ag, and Si have been determined by x-ray diffraction measurements and transmission electron microscopy. Magnetic properties have also been characterized. © 1999 Americ...
متن کاملDependence of Co anisotropy constants on temperature, processing, and underlayer
The dependence of the Co anisotropy constants on the measurement temperature, deposition conditions, and underlayer materials was studied using unicrystal Co~101̄0!/Cr ~or NiAl!~112!/ Ag~110! films sputter deposited on hydrofluoric acid etched Si~110! substrates. The single, in-plane easy axis orientation in these films allows the direct determination of the anisotropy constants. The anisotropy ...
متن کاملEpitaxial growth of Cu (001) on Si (001): Mechanisms of orientation development and defect morphology
We describe the evolution of microstructure during ultrahigh vacuum ion beam sputter deposition of Cu (00 1) at room temperature on hydrogen-terminated Si (00 1) . In situ reflection high energy electron diffraction indicates growth of an epitaxial Cu (001) film on Si (001) with the intensity of the Bragg rods sharpening during 5-20 nm of Cu film growth. Post-growth x-ray diffraction indicates ...
متن کاملReduction of hydrogen induced losses in PECVD - SiO , N , optical waveguides in the near infrared
Introduction Silicon oxynitride is a flexible material for use as planar optical waveguides because by changing the composition ( O N ratio) the refractive index can be tuned from 1.46 to 2.0'. Several methods can be used for deposition: PECVD, LPCVD and sputtering. The advantages of PECVD are easy control of composition, high deposition rate and low stress. A disadvantage is the high hydrogen ...
متن کامل