A General Solution for Anti-plane Elastic Field in Anisotropic Media Containing an Eshelby’s Elliptic Inhomogeneity
نویسندگان
چکیده
A general complex variable approach is presented for anti-plane problem for a system of one anisotropic elliptic inhomogeneity embedded in an infinite anisotropic medium (matrix). The system is subject to far-field shear stresses in the matrix at infinity and eigenstrains inside the inhomogeneity. The solution is derived based on conformal mapping for the complex variable and Laurent series expansion for the stress functions in which the coefficients in the series are determined by using continuous conditions at the interface. The shear stress distribution at the interface and displacements for the entire system are shown for the case of polynomial eigenstrains with the forms of uniform, linear and quadratic distributions, respectively. The translational deformation of the inhomogeneity and the effect of the orientation of principal axes of the anisotropic materials on the displacements of both the matrix and inhomogeneity are illustrated.
منابع مشابه
On the Existence of Eshelby’s Equivalent Ellipsoidal Inclusion Solution
The existence of Eshelby’s equivalent inclusion solution is proved for a degenerate “transformed” ellipsoidal inhomogeneity in an infinite anisotropic linear elastic matrix. We prove the invertibility of the fourth rank tensor expression, C S + C(I − SE), where C is the stiffness tensor of the matrix, C ′ is the stiffness tensor of the inhomogeneity, SE is the Eshelby tensor, and I is the symme...
متن کاملShear Waves Through Non Planar Interface Between Anisotropic Inhomogeneous and Visco-Elastic Half-Spaces
A problem of reflection and transmission of a plane shear wave incident at a corrugated interface between transversely isotropic inhomogeneous and visco-elastic half-spaces is investigated. Applying appropriate boundary conditions and using Rayleigh’s method of approximation expressions for reflection and transmission coefficients are obtained for the first and second order approximation of the...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کاملMultiple cracks in an elastic half-plane subjected to thermo-mechanical loading
An analytical solution is presented for the thermoelastic problem of a half-plane with several cracks under thermo mechanical loading using distributed dislocation technique. The uncoupled quasi-static linear thermoelasticity theory is adopted in which the change in temperature, if any, due to deformations is neglected. The stress field in a half-plane containing thermoelastic dislocation is ob...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کامل