Bulk heterojunction photovoltaic cells based on tetra-methyl substituted copper(II) phthalocyanine:P3HT:PCBM composite.
نویسندگان
چکیده
Insoluble CuMePc nanocrystals were incorporated into P3HT:PCBM bulk heterojunction photovoltaic cells to increase the carrier mobility and photon harvesting. The P1C1-based (weight ratio of P3HT: CuMePc = 1:1) OPV cell exhibited the best photovoltaic performance with a J(SC) of 16.3 mA cm(-2), V(OC) of 0.58 V, FF of 0.56 and PCE of 5.3%.
منابع مشابه
High Efficiencies in Nanoscale Poly(3-Hexylthiophene)/Fullerene Solar Cells
A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...
متن کاملFabrication of Small-Molecular-Weight Organic Thin-Film Solar Cells by Combination of Wet and Dry Processes
We succeeded to fabricate p-n heterojunction and bulkheterojunction small-molecular-weight organic thin-film solar cells by combination of dry (p-type = zinc phthalocyanine, n-type = fullerene) and wet (p-type = tetra-tert-butyl zinc phthalocyanine, n-type = [6,6]-phenylC61-buteric acid methyl ester) processes. Relationship between morphologies of semiconducting layers and photovoltaic properti...
متن کاملExtraction of Traces of Copper as Tetra-Butylammonium Tetrathiocyanato Copper (II) and Its Spectrophotometric Determination Using Eriochrome Black T
An extraction-spectrophotometric method for the determination of traces of copper (II) is described. The method is based on the quantitative extraction of copper as tetrabutylammonium tetrathiocyanato copper (II) into methyl isobutyl ketone, followed by spectrophotometric determination, using eriochrome black T as a metallochromic indicator. The red-violet mixed complex of copper absorbs at...
متن کاملA facile room temperature iodination route to in situ fabrication of patterned copper-iodide/silicon quasi-bulk-heterojunction thin films for photovoltaic application.
Fabrication of a monocrystalline silicon based heterojunction film at room-temperature in a time-efficient manner is desirable for energy and environmental considerations. In this report, a gas-solid phase direct elemental reaction (DER) route to realize this aim by firstly depositing an elemental copper layer on a monocrystalline silicon surface followed by a reaction with iodine vapor is desc...
متن کاملA compact physical model for morphology induced intrinsic degradation of organic bulk heterojunction solar cell
The gradual loss of efficiency during field operation poses a fundamental challenge for economic viability of any solar cell technology. Well known examples include light-induced degradation in Si-based cell (Staebler-Wronski effect), Cu diffusion in thin film (copper indium gallium selenide) cell, hot-spot degradation in series connected modules, etc. Here we develop a compact model for an int...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 47 34 شماره
صفحات -
تاریخ انتشار 2011