Amorphous mesoporous GeOx anode for Na-ion batteries with high capacity and long lifespan
نویسندگان
چکیده
It is recently demonstrated that amorphous Ge anode shows higher reversible Na-ion storage capacity (590 mA h g-1) than crystallized Ge anode (369 mA h g-1). Here, amorphous GeO x anode is prepared by a simple wet-chemistry reduction route at room temperature. The obtained amorphous GeO x shows a porous hierarchical architecture, accompanied with a Brunauer-Emmett-Teller surface area of 159 m2 g-1 and an average pore diameter of 14 nm. This unique structure enables the GeO x anode to enhance the Na-ion/electron diffusion rate, and buffer the volume change. As anode for Na-ion battery, high reversible capacity over 400 mA h g-1, fine rate capability with a capacity of 200 mA h g-1 maintained at 3.0 A g-1 and long-term cycling stability with 270 mA h g-1 even over 1000 cycles at 1.0 A g-1 are obtained.
منابع مشابه
Tin anode for sodium-ion batteries using natural wood fiber as a mechanical buffer and electrolyte reservoir.
Sodium (Na)-ion batteries offer an attractive option for low cost grid scale storage due to the abundance of Na. Tin (Sn) is touted as a high capacity anode for Na-ion batteries with a high theoretical capacity of 847 mAh/g, but it has several limitations such as large volume expansion with cycling, slow kinetics, and unstable solid electrolyte interphase (SEI) formation. In this article, we de...
متن کاملElectrochemical Performance of Porous Carbon/Tin Composite Anodes for SodiumIon and LithiumIon Batteries
The electrochemical performance of mesoporous carbon (C)/tin (Sn) anodes in Na-ion and Li-ion batteries is systematically investigated. The mesoporous C/Sn anodes in a Na-ion battery shows similar cycling stability but lower capacity and poorer rate capability than that in a Li-ion battery. The desodiation potentials of Sn anodes are approximately 0.21 V lower than delithiation potentials. The ...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملSnSe alloy as a promising anode material for Na-ion batteries.
SnSe alloy is examined for the first time as an anode for Na-ion batteries, and shows excellent electrochemical performance including a high reversible capacity of 707 mA h g(-1) and stable cycle performance over 50 cycles. Upon sodiation, SnSe is changed into amorphous NaxSn nanodomains dispersed in crystalline Na2Se, and SnSe is reversibly restored after desodiation.
متن کاملHigh capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries.
A Sb/C nanocomposite was synthesized and found to deliver a reversible 3 Na storage capacity of 610 mA h g(-1), a strong rate capability at a very high current of 2000 mA g(-1) and a long-term cycling stability with 94% capacity retention over 100 cycles, offering practical feasibility as a high capacity and cycling-stable anode for room temperature Na-ion batteries.
متن کامل